# The pot

The pot is in 1/3 filled with water. Bottom of the pot has an area of 329 cm

How many centimeters rises water level in the pot after add 1.2 liters of water?

^{2}.How many centimeters rises water level in the pot after add 1.2 liters of water?

**Result****Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):**

**Showing 0 comments:**

**Be the first to comment!**

#### To solve this example are needed these knowledge from mathematics:

## Next similar examples:

- Orlík hydroelectric plant

The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m^{3}/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the p - Cu thief

The thief stole 122 meters copper wire with cross-section area of 95 mm^{2}. Calculate how much money gets in the scrap redemption, if redeemed copper for 5.5 eur/kg? The density of copper is 8.96 t/m^{3}. - Copper plate

Calculate the thickness of the copper plate with a density 8.7 g/cm³ measuring 1.5 meters and 80 cm and its weight is 3.65 kg - Reconstruction of the corridor

Calculate how many minutes will be reduced to travel 187 km long railway corridor, where the maximum speed increases from 120 km/h to 160 km/h. Calculate how many minutes will shorten travel time, if we consider that the train must stop at 6 stations, eac - Trains for people

It is said that the train is synonymous to delay. Calculate the average speed of travel by train long 85 km, with regular train leave at 7:00 and arrive at 8:18, but train is late and has departure at 8:10 and arrive at 9:27. - Pump

What power has a pump output to move 4853 hl of water to a height of 31 m for 8 hours? - Sphere

Surface of the sphere is 2820 cm^{2}, weight is 71 kg. What is its density? - Copper sheet

The copper plate has a length of 1 m, width 94 cm and weighs 9 kg. What is the plate thickness, if 1 m^{3}weighs 8715 kg? - Sphere slices

Calculate volume and surface of a sphere, if the radii of parallel cuts r_{1}=31 cm, r_{2}=92 cm and its distance v=25 cm. - Clock

How many times a day hands on a clock overlap? - Tower model

Tower height is 300 meters, weight 8000 tons. How high is the model of the tower weight 1 kg? (State the result in the centimeters). The model is made from exactly the same material as the original no numbers need to be rounded. The result is a three-digi - A car

A car weighing 1.05 tonnes driving at the maximum allowed speed in the village (50 km/h) hit a solid concrete bulkhead. Calculate height it would have to fall on the concrete surface to make the impact intensity the same as in the first case! - Friction coefficient

What is the weight of a car when it moves on a horizontal road at a speed of v = 50 km/h at engine power P = 7 kW? The friction coefficient is 0.07 - Aluminum wire

Aluminum wire of 3 mm diameter has a total weight of 1909 kg and a density of 2700 kg/m^{3}. How long is the wire bundle? - Canister

Gasoline is stored in a cuboid canister having dimensions 44.5 cm, 30 cm, 16 cm. What is the total weight of a full canister when one cubic meter of gasoline weighs 710 kg and the weight of empty canister is 1.5 kg? - Traffic collision

When investigating a traffic accident, it was found that the driver stopped the vehicle immediately after the accident by constant braking on a 150 m track in 15 seconds. Do you approve that the driver exceeded the permitted speed (50 km/h) in the village. - Car

At what horizontal distance reaches the car weight m = 753 kg speed v = 74 km/h when the car engine develops a tensile force F = 3061 N. (Neglect resistance of the environment.)