Elevator
In homes with more floors, elevators are used. For passenger transport, the most commonly used traction elevator counterweight. The top of the shaft
engine room with the engine. The car is suspended on a rope, which is guided up over two pulleys to the counterweight.
Consider lift-enabled load Mmax = 300 kg
car weight mk = 500 kg
weight counterweight mz = 650 kg. The cabin moves at the speed
v0 = 1.2 m/s. The total efficiency of power is k =75%.
a) Explain what affects the efficiency of the system and the reason for using a counterweight.
b) Determine the power P1 engine lift if you summon empty cabin residents of the upper floors, which moves down the speed of v0.
c) Determine the power P2 engine lift when a group of citizens with a total mass M = 250 kg conveys speed v0 upwards.
In which of these cases b), c) the need for more power?
g = gravitational constant 10 N/kg
engine room with the engine. The car is suspended on a rope, which is guided up over two pulleys to the counterweight.
Consider lift-enabled load Mmax = 300 kg
car weight mk = 500 kg
weight counterweight mz = 650 kg. The cabin moves at the speed
v0 = 1.2 m/s. The total efficiency of power is k =75%.
a) Explain what affects the efficiency of the system and the reason for using a counterweight.
b) Determine the power P1 engine lift if you summon empty cabin residents of the upper floors, which moves down the speed of v0.
c) Determine the power P2 engine lift when a group of citizens with a total mass M = 250 kg conveys speed v0 upwards.
In which of these cases b), c) the need for more power?
g = gravitational constant 10 N/kg
Correct answer:
Tips for related online calculators
Our percentage calculator will help you quickly calculate various typical tasks with percentages.
Do you want to convert velocity (speed) units?
Do you want to convert time units like minutes to seconds?
Do you want to convert velocity (speed) units?
Do you want to convert time units like minutes to seconds?
You need to know the following knowledge to solve this word math problem:
Units of physical quantities:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Heat energy
Energy is measured using the unit Joule (J). Temperature is measured using the unit degree Celsius °C). To increase the temperature of 1 liter of water by 1°C, 4200 J of heat energy is required. (a) Kelly wants to increase the temperature of 2 liters of w - Electric input power
Solve problems related to electric power: a) U = 120 V, I = 0.5 A, P =? b) P = 200 W, U = 230 V, I =? c) I = 5 A, P = 2200W, U =? - The appliance
The appliance has a power input of 2.3 kW. It is connected to the mains voltage of 230 V. What is the current flowing through the appliance? - Filament of bulb
The bulb's filament has a 1-ohm resistivity and is connected to a voltage of 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
- An electricity
If the Rodriguez family used 520 kilowatt-hours of electricity in 12 days, how many kilowatt-hours should they use in 6 days at the same usage rate? - KiloJoules energy
In the washing machine, 6 liters of water were heated from a temperature of 22 degrees to 62 degrees. Find out the weight of 6 liters of water. What heat (in kJ= kiloJoules) did the water receive? - Several resistors
We have a box with the same resistors, so all of them have a resistance value of 200 ohms. Draw the connection of several resistors so that the resulting resistance is: a) 100 b) 120 (only 4 resistors) - Coefficient 81094
A car moves along a horizontal road at a speed of 15 m/s. After turning off the engine, the car traveled a distance of 225 m. What was the coefficient of friction for this motion? - Transformer 3
A 200/115 V transformer has an LV (Low voltage) side resistance of 0.06 Ohm. What is the resistance referred to HV side (high voltage)?
- A charge
A charge of 9 C passes through series-connected resistors with resistances of 40 ohms and 60 ohms in 1 minute. a) What voltage are they connected to? b) Calculate the voltage across each resistor. - A light bulb
We want to connect a 2.5 V, 0.3 A light bulb to a flat battery. How much resistance and how do we need to connect to the light bulb? - A current
A current of 0.1 A flows in the branch with a resistance of 5 ohms. In the second branch, a current of 0.2 A. Calculate: a) what is the resistance of the second branch, b) to what voltage was the circuit connected? - Resistance 80577
Three identical resistors connected in series have a total resistance of 9 ohms. What will be their total resistance when connected in parallel - Ohms
Two resistors of 6 ohms and 8 ohms are connected in parallel to a flat battery U=4.5 V. Calculate: a) the total current, b) the current in the branches.
- Two conductors
Two conductors have resistance Rs=5 ohms when connected in series and Rp=1.2 ohms when connected in parallel. Calculate the value of the resistors. - Nikelin and brass
Calculate the length of brass wire (ró=0.08 microohm m) and nickel (ró=0.4 microohm m) with a diameter of 0.5 mm, which has a resistance of 1 ohm - Resistivity 80483
The heating coil of the cooker has a resistance of 70.5 ohms and is made of a wire with a diameter of 0.30 mm and a length of 9.8 m. Determine the resistivity of the material from which it is made.