# Square circles

Calculate the length of the described and inscribed circle to the square ABCD with a side of 5cm.

**Result****Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):**

**Showing 0 comments:**

**Be the first to comment!**

#### To solve this example are needed these knowledge from mathematics:

## Next similar examples:

- Concentric circles

In the circle with diameter 19 cm is constructed chord 9 cm long. Calculate the radius of a concentric circle that touches this chord. - The chord

Calculate a chord length which the distance from the center of the circle (S, 6 cm) equals 3 cm. - Square diagonal

Calculate the length of diagonal of the square with side a = 4 cm. - Square diagonal

Calculate length of the square diagonal if the perimeter is 304 cm. - Thales

Calculate the length of the Thales' circle described to right triangle with hypotenuse 18.4 cm. - Common chord

Two circles with radius 17 cm and 20 cm are intersect at two points. Its common chord is long 27 cm. What is the distance of the centers of these circles? - Chord 4

I need to calculate the circumference of a circle, I know the chord length c=22 cm and the distance from the center d=29 cm chord to the circle. - Cableway

Cableway has a length of 1800 m. The horizontal distance between the upper and lower cable car station is 1600 m. Calculate how much meters altitude is higher upper station than the base station. - Chord

It is given to a circle k(r=6 cm) and the points A, B such that / AB / = 8 cm lies on k. Calculate the distance of the center of circle S to the midpoint C of the segment AB. - Chord circle

The circle to the (S, r = 8 cm) are different points A, B connected segment /AB/ = 12 cm. AB mark the middle of S'. Calculate |SS'|. Make the sketch. - Satin

Sanusha buys a piece of satin 2.4 m wide. The diagonal length of the fabric is 4m. What is the length of the piece of satin? - Sphere cuts

At what distance from the center intersects sphere with radius R = 56 plane, if the cut area and area of the main sphere circle is in ratio 1/2. - Mine

Wheel in traction tower has a diameter 2 m. How many meters will perform an elevator cabin if wheel rotates in the same direction 66 times? - Cone 15

The radius of the base of a right circular cone is 14 inches and it's height 18 inches. What is the slant height? - Broken tree

The tree was 35 meters high. The tree broke at a height of 10 m above the ground. Top but does not fall off it refuted on the ground. How far from the base of the tree lay its peak? - Double ladder

The double ladder shoulders should be 3 meters long. What height will the upper top of the ladder reach if the lower ends are 1.8 meters apart? - Double ladder

The double ladder is 8.5m long. It is built so that its lower ends are 3.5 meters apart. How high does the upper end of the ladder reach?