# Gutter

How much metal is needed for production 46 pieces of gutter pipes with the diameter 12 cm and length of 4 m? The plate bends add 2% of the material.

**Result****Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):**

**Showing 0 comments:**

**Be the first to comment!**

#### To solve this example are needed these knowledge from mathematics:

## Next similar examples:

- Pipes

Water pipe has a cross-section 1405 cm^{2}. An hour has passed 756 m^{3}of water. How much water flows through the pipe with cross-section 300 cm^{2}per 15 hours if water flow same speed? - Cylinders

Area of the side of two cylinders is same rectangle of 50 cm × 11 cm. Which cylinder has a larger volume and by how much? - Plastic pipe

Calculate weight of the plastic pipe with diameter d = 70 mm and length 380 cm if the wall thickness is 4 mm and the density of plastic is 1367 kg/m^{3}. - Hole

In the center of the cube with edge 14 cm we will drill cylinder shape hole. Volume of the hole must be 27% of the cube. What drill diameter should be chosen? - Circular pool

The base of pool is circle with a radius r = 10 m excluding circular segment that determines chord length 10 meters. Pool depth is h = 2m. How many hectoliters of water can fit into the pool? - Cylinder - basics

Cylinder with base radius r = 45 dm and height h=22 dm. Calculate: - The pot

The pot is in 1/3 filled with water. Bottom of the pot has an area of 329 cm^{2}. How many centimeters rises water level in the pot after add 1.2 liters of water? - Cylinder height

Calculate the height of the cylinder and its surface is 2500 dm^{2}and the bases have a diameter 5dm. - Gold wire

From one gram of gold was pulled wire 2.1 km length. What is it diameter if density of Au is ρ=19.5 g/cm^{3}? - Cu wire

Copper wire has a length l = 980 m and diameter d = 8 mm. Calculate the weight if density of copper is ρ = 8500 kg/m^{3}. Result round to one decimal place. - A cylindrical tank

A cylindrical tank can hold 44 cubic meters of water. If the radius of the tank is 3.5 meters, how high is the tank? - Barrel of oil

Barrel of oil weighs 283 kg. When it mold 26% oil, weighed 216 kg. What is the mass of the empty barrel? - Lathe

From the cube of edge 37 cm was lathed maximum cylinder. What percentage of the cube is left as waste after lathed? - Floating barrel

Barrel (cylinder shape) floats on water, top of barrel is 8 dm above water and the width of surfaced barrel part is 23 dm. Barrel length is 24 dm. Calculate the volume of the barrel. - Roller

Cylinder shell has the same content as one of its base. Cylinder height is 15 dm. What is the radius of the base of the cylinder? - Axial section

Axial section of the cylinder has a diagonal 31 cm long and we know that the area of the side and the area of base is in ratio 3:2. Calculate the height and radius of the cylinder base. - Tinsmith

Tinsmith construct chimney pipe 145 cm long and 15 cm wide. What are the dimensions of the sheet will have to prepare for the construction of a pipe when the plate overlap at the joint add $x cm width of the plate?