Circle in rhombus
In the rhombus is inscribed circle. Contact points of touch divide the sides to parts of length 22 dm and 9 dm. Calculate the circle area.
Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):
Showing 0 comments:
Be the first to comment!
To solve this example are needed these knowledge from mathematics:
Next similar examples:
It is given a rhombus of side length a = 29 cm. Touch points of inscribed circle divided his sides into sections a1 = 14 cm and a2 = 15 cm. Calculate the radius r of the circle and the length of the diagonals of the rhombus.
- Square and circles
Square with sides 61 mm is circumscribed and inscribed with circles. Determine the radiuses of both circles.
To circle with a radius of 41 cm from the point R guided two tangents. The distance of both points of contact is 16 cm. Calculate the distance from point R and circle centre.
The clock shows 12 hours. After how many minutes will agle between hour and minute hand 90°? Consider the continuous movement of both hands hours.
In rectangle with sides 3 and 10 mark the diagonal. What is the probability that a randomly selected point within the rectangle is closer to the diagonal than to any side of the rectangle?
- MO SK/CZ Z9–I–3
John had the ball that rolled into the pool and it swam in the water. Its highest point was 2 cm above the surface. Diameter of circle that marked the water level on the surface of the ball was 8 cm. Determine the diameter of John ball.
How many times a day hands on a clock overlap?
The areas of the two circles are in the ratio 2:14. The larger circle has diameter 14. Calculate the radius of the smaller circle.
- Circle arc
Circle segment has a circumference of 41.89 m and 251.33 m2 area. Calculate the radius of the circle and size of central angle.
Circular cone of height 15 cm and volume 10598 cm3 is at third of the height (measured from the bottom) cut plane parallel to base. Calculate the radius and circumference of the circular cut.
Convert 270° to radians. Write result as multiple of number π.
- Circle chord
What is the length d of the chord circle of diameter 36 m, if distance from the center circle is 16 m?
The rectangle is 31 cm long and 28 cm wide. Determine the radius of the circle circumscribing rectangle.
Washing machine drum wash at 54 RPM. Washing machine motor pulley has diameter 5 cm. What must be the diameter of the drum machine pulley when the motor is at 301 RPM?
- Cone A2V
Surface of cone in the plane is a circular arc with central angle of 126° and area 415 dm2. Calculate the volume of a cone.
Area of the side of two cylinders is same rectangle of 12 mm × 19 mm. Which cylinder has a larger volume and by how much?
Two gears, fit into each other, has transfer 2:3. Centres of gears are spaced 82 cm. What are the radii of the gears?