Density - high school - practice problems
Number of problems found: 60
- A raft
I want to build a raft, and I have beams with a square section with side a=20cm and length l=2m, wood density 670 kg/m³. I will connect 10 beams - what is the volume of the raft and its weight? How deep will a raft sink in water (water density 1000kg/m³)? - Suspended 82617
A round steel weight (ρ1=7800 kg/m3) is suspended on a thread and immersed in water (ρ2=1000 kg/m3). The volume of the weight is 1dm³. With what force is the thread stretched? - Horizontal 82601
Water flows in a horizontal tube at a speed of 2.24 m/s and has a pressure of 0.1 MPa. How fast does the water flow in the narrowed part of the tube if its pressure is 0.09 MPa? - Semi-skimmed 82206
The dairy produces semi-skimmed milk (with 1.5% fat content) by skimming part of the fat from full-fat milk (with 4% fat content). 1 ton of semi-skimmed milk is produced from how many kilograms of fat milk?
- Calculate 82037
They will calculate the volume of a body that stretches the force gauge in the air with a force of 80N. After immersion in glycerol with a density of 12 kg. m-3 is a load cell stretched by a force of 30N. - Submerged 81714
A concrete column with a density of 3500 kg/m3, a height of 6 m, and a square base of a=25 cm lies at the bottom of the dam at a depth of 10 m. At the upper end, it is lifted by a rope by a crane. 1) with how much force does the pole stretch th - Differential 80799
Kerosene (ρ1 = 830 kg . m-3) flows through the pipe. Calculate the pressure difference in the given sections when the mercury level difference (ρ2 = 13600 kg . m-3) in the mercury differential manometer is h = 2.2 dm. - Hydrostatic 80798
Calculate the depth of water at which the hydrostatic pressure is equal to 100870 N/m². We only consider hydrostatic pressure. - Calculate 74794
A wooden cylinder with a diameter of 20 cm and a length of 1 m is immersed in water. The specific weight of wood is 700kg/m³. For example, calculate the height of the wood that is above the water. The role was assigned to me as a high school freshman math
- Bracelet 70684
A gold ring with a width of 1 cm is made by drilling a sphere with a radius of 1 cm through its center. A gold bracelet with a width of 1 cm is made by drilling a sphere with a radius of 4 cm through its center. Which piece of jewelry will be worth more i - Difference 69354
An airplane flies at a speed of 920 km/h at an altitude of 11 km above the surface of the Earth, where the air density is p = 0.36 kg/m³. Determine the pressure difference above and below the plane's wing if the top of the plane is 10% longer than the bot - Pump power
Determine the pump power if: I pour 3 m³ of water from the tank in 120 seconds with a hose. The height of the hose mouth above the tank is 1.5 m. The water's speed from the hose outlet is 20 m/s. - (cashews/beetroots) 66984
The lady sells nuts. It has two mixtures of nuts (cashews/beetroots) in a ratio of 2:1 and 1:3 (cashews and peanuts). Determine the ratio to mix both mixtures so that the ratio of cashews/beetroot in the resulting mixture is 1:2. (Please provide a certifi - Temperature 61484
The air bubble at the bottom of the lake at a depth of h = 21 m has a radius r1 = 1 cm at a temperature of t1 = 4 °C. The bubble rises slowly to the surface, and its volume increases. Calculate its radius when it reaches the lake's surface, with a tempera
- The coil 2
The coil of a moving coil voltmeter is 40 mm long and 30 mm wide and has 100 turns on it. The control spring exerts a torque of 240 x 10-6 N-m when the deflection is 100 divisions on a full scale if the flux density of the magnetic field in the air gap is - Weight fraction
To prepare the brine, we need 1500 g of an aqueous salt solution with a weight fraction of 0.08. What salt weight and water volume do we need to prepare it? - Gravitational 54411
How much force do we lift a stone in the water that weighs 30 kg and has a density of 2500 kg/m³? Gravitational acceleration g = 10 m/s². - Dynamometer
What is the volume of a body that stretches a dynamometer in air, on which a force of 2.5 N suspends it, and if it is immersed in alcohol with a density of 800 kg/m³, does it tension the dynamometer with a force of 1.3 N? - Above water surface
If we remove the stone from the water, we apply a force of 120N. How much force will we exert if we move the stone above the water? The stone's density is 5000 kg/m³.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.