Electrical engineering - examplesElectrical engineering is a engineering discipline that generally deals with the study and application of electricity, electronics, and electromagnetism.
Two resistors connected in series give the resulting resistance 216Ω and 48Ω in parallel. Determine the resistance of this resistors.
Determine the resistance of the bulb with current 200 mA and is in regular lamp (230V).
Solve the textbook problems - transformer: a) N1 = 40, N2 = 80, U2 = 80 V, U1 =? b) N1 = 400, U1 = 200 V, U2 = 50 V, N2 =?
- Coil as a girl
The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V?
- The bulbs
The bulbs are connected serially two bulbs and one resistor. Each bulb has a resistivity of 100 ohms and resistor of 60 ohms The voltage source in the circuit is 24 volts. Do you know what voltage to measure on individual appliances?
- Electric energy
There are 875 identical light bulbs in the sports hall lighting for 2 hours. How long does the same amount of electricity consume 100 such bulbs?
- Resistance of the resistor
The resistor terminals have a voltage of 20 V and a current of 5 mA is passed through. What is the resistance of the resistor?
- Orlík hydroelectric plant
The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m3/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the p
- Electric input power
Solve problems related to electric power: a) U = 120 V, I = 0.5 A, P =? b) P = 200 W, U = 230 V, I =? c) I = 5 A, P = 2200W, U =?
There are 875 identical light bulbs in the sports hall lightning for 2 hours. How long does it lightning 100 this light bulbs?
- Filament of bulb
The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
- Two resistors
Two resistors when they give 25 ohms in series and 4 ohms in parallel what the values of
A resistor having an electrical resistance of 1.5 k ohms passes an electrical current of 0.1 A. Calculate what voltage is between the terminals of the resistor.
- Effective and mean voltage
A voltage divider consisting of resistors R1 = 103000 Ω and R2 = 197000 Ω is connected to the ideal sine wave voltage source, R2 is connected to a voltmeter which measures the mean voltage and has an internal resistance R3 = 200300 Ω, the measured value is
See also more information on Wikipedia.