# Propeller

The aircraft propeller rotates at an angular speed of 200 rad/s.

A) What is the speed at the tip of the propeller if its distance from the axis of rotation is 1.5 m?

B) What path does the aircraft travel during one revolution of the propeller at a speed of 540 km/h?

A) What is the speed at the tip of the propeller if its distance from the axis of rotation is 1.5 m?

B) What path does the aircraft travel during one revolution of the propeller at a speed of 540 km/h?

**Correct result:****Showing 0 comments:**

Tips to related online calculators

Do you want to convert velocity (speed) units?

Do you want to convert time units like minutes to seconds?

Try conversion angle units angle degrees, minutes, seconds, radians, grads.

Do you want to convert time units like minutes to seconds?

Try conversion angle units angle degrees, minutes, seconds, radians, grads.

#### You need to know the following knowledge to solve this word math problem:

We encourage you to watch this tutorial video on this math problem: video1

## Next similar math problems:

- Current in the conductor

Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm). - Candles

Before Christmas, Eva bought two cylindrical candles - red and green. Red was 1 cm longer than green. She lit a red candle on Christmas Day at 5:30 p. M. , lit a green candle at 7:00 p. M. , and left them both on fire until they burned. At 9:30 p. M. , bo - Two resistors

Two resistors 20 Ω and 60 Ω are connected in series and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment! - Lowest voltage

Three resistors with resistors R1 = 10 kΩ, R2 = 20 kΩ, R3 = 30 kΩ are connected in series and an external voltage U = 30 V is connected to them. On which resistor is the lowest voltage? - Transformer

Solve the textbook problems - transformer: a) N1 = 40, N2 = 80, U2 = 80 V, U1 =? b) N1 = 400, U1 = 200 V, U2 = 50 V, N2 =? - Filament of bulb

The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds? - Coil as a girl

The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V? - Resistance of the resistor

The resistor terminals have a voltage of 20 V and a current of 5 mA is passed through. What is the resistance of the resistor? - Resistance

Determine the resistance of the bulb with current 200 mA and is in regular lamp (230V). - Fog

The car started in fog at speed 30 km/h. After a 12-minute drive, the fog dissipated and the driver drove next 12 minutes distance 17 km. On the last 17 km long again the driving conditions deteriorated and the driver drove the speed of 51 km/h. a) Calcul - Copper winding

Calculate the current flowing through the copper winding at an operating temperature of 70°C. Celsius, if the winding diameter is 1.128 mm and the winding length is 40 m. The winding is connected to 8V. - The bulb

What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA? - Up and down motion

We throw the body from a height h = 5 m above the Earth vertically upwards v0 = 10 m/s. How long before we have to let the second body fall freely from the same height to hit the Earth at the same time? - The bulb

The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V? - Train delay

Due to a breakdown, the train lost 16 minutes of standing on the track behind Brno. He "eliminated" this delay so that after the start, the 80 km long section went at a speed 10 km/h higher than originally planned. What speed was it and what was it suppos - On the

On the map of Europe made at a scale of 1: 4000000, the distance between Bratislava and Paris is 28 cm. At what time an airplane flying at 800 km/h will fly this journey? - Electric work

Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply.