Rotaty motion

What is the minimum speed and frequency that we need to rotate with water can in a vertical plane along a circle with a radius of 70 cm to prevent water from spilling?

Correct result:

v =  2.6458 m/s
f =  0.6015 Hz

Solution:

$$\begin{gathered} r=70\text{ cm}\to \text{ m}=70\mathrm{/}100\text{ m}=0.7\text{ m } \\ g=10{\text{m/s}}^2 \\ {F}_g=F_o \\ mg={\displaystyle \frac{m{v}^2}{r}} \\ g={\displaystyle \frac{v^2}{r}} \\ v=\sqrt{r\cdot g}=\sqrt{0.7\cdot 10}=\sqrt{7}\doteq 2.6458=2.6458\text{ m/s } \\ \omega =v\mathrm{/}r=2.6458\mathrm{/}0.7\doteq 3.77961\text{/rad} \end{gathered}$$

$$\begin{gathered} \omega =2\pi f \\ f={\displaystyle \frac{\omega }{2\pi }}={\displaystyle \frac{3.7796}{2\cdot 3.1416}}=0.6015\text{ Hz} \end{gathered}$$

Try another example

Showing 0 comments:

Next similar math problems:

• Acceleration
  Describe how the cyclist's acceleration changes on individual sections (sections AB plane, BC turn, CD plane, DA turn), which describes the trajectory in the shape of an eight at a constant speed. The speed on the cyclist's tachometer is constant
• RPM
  An electric motor makes 3,000 revolutions per minutes. How many degrees does it rotate in one second?
• Velocipedes
  In the 19th century, bicycles did not have a chain drive, and the pedals were connected directly to the wheel axis. This wheel diameter gradually increased until the so-called high bicycles (velocipedes) with a front wheel diameter of up to 1.5 meters, wh
• A large
  A large gear will be used to turn a smaller gear. The large gear will make 75 revolutions per minute. The smaller gear must make 384 revolutions per minute. Find the smallest number of teeth each gear could have. [Hint: Use either GCF or LCM. ]
• Two gears
  The two gears fit together. The larger gear has 32 teeth, the smaller has 20 teeth less. How many times does turn a smaller gear if the bigger gear turns three times?
• Earth's diameter
  The Earth's diameter on the equator is approximately 12750 km. How long does the Gripen flyover the Earth above the equator at 10 km if it is at an average speed of 1500 km / h?
• Average speed
  What is the average speed you have to move the way around the world in 80 days? (Path along the equator, round to km/h).
• Flywheel
  Flywheel turns 450 rev/min (RPM). Determine the magnitude of the normal acceleration of the flywheel point which are at a distance of 10 cm from the rotation axis.
• Ferris wheel
  Ferris wheel reaches to 22 m tall and moves at the speed of 0.5m/s. During one drive wheel rotates three times. What is the total drive time?
• Velocity ratio
  Determine the ratio at which the fluid velocity in different parts of the pipeline (one part has a diameter of 5 cm and the other has a diameter of 3 cm), when you know that at every point of the liquid is the product of the area of tube [S] and the fluid
• Clock Tower
  What angle is betwenn hands on Clock Tower when show 17 hours and 35 minutes?
• Saw
  Blade circular saw with a diameter 42 cm turns 825 times per minute. Expresses his cutting speed in meters per minute.
• Circular motion
  Mass point moves moves uniformly in a circle with radius r = 3.4 m angular velocity ω = 3.6 rad/s. Calculate the period, frequency, and the centripetal acceleration of this movement.
• Trough
  How many liters of water per second can go via trough, which has a cross section of semicircle with radius 2.5 m and speed of water is 147 cm per second?
• Overload
  Calculate how many g's (gravity accelerations) feel glider pilot when turning the horizontal circles of radius 148 m flying at 95 km/h. Centripetal acceleration is proportional to the square of the speed and inversely proportional to the radius of rotatio
• Clock
  How many times a day hands on a clock overlap?
• Hands
  The clock shows 12 hours. After how many minutes will angle between the hour and minute hand 90°? Consider the continuous movement of both hands hours.