# Liquid

How much liquid does the rotary cylinder tank hold with base diameter 1.2m and height 1.5m?

**Result****Leave us a comment of this math problem and its solution (i.e. if it is still somewhat unclear...):**

**Showing 0 comments:**

**Be the first to comment!**

Tips to related online calculators

Tip: Our volume units converter will help you with the conversion of volume units.

#### Following knowledge from mathematics are needed to solve this word math problem:

## Next similar math problems:

- Angled cyclist turn

The cyclist passes through a curve with a radius of 20 m at 25 km/h. How much angle does it have to bend from the vertical inward to the turn? - Cu thief

The thief stole 122 meters copper wire with cross-section area of 95 mm^{2}. Calculate how much money gets in the scrap redemption, if redeemed copper for 5.5 eur/kg? The density of copper is 8.96 t/m^{3}. - 3d printer

3D printing ABS filament with diameter 1.75 mm has density 1.04 g/cm^{3}. Find the length of m = 5 kg spool filament. (how to calculate length) - Orlík hydroelectric plant

The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m^{3}/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the - Car crash

On the road, with a maximum permitted speed of 60 km/h, there was a car crash. From the length of the vehicle's braking distance, which was 40 m, the police investigated whether the driver did not exceed that speed. What is the conclusion of the police, as - Water level

How high is the water in the swimming pool with dimensions of 37m in length and 15m in width, if an inlet valve is opened for 10 hours flowing 12 liters of water per second? - Copper plate

Calculate the thickness of the copper plate with a density 8.7 g/cm³ measuring 1.5 meters and 80 cm and its weight is 3.65 kg - A car

A car weighing 1.05 tonnes driving at the maximum allowed speed in the village (50 km/h) hit a solid concrete bulkhead. Calculate height it would have to fall on the concrete surface to make the impact intensity the same as in the first case! - Pump

What power has a pump output to move 4853 hl of water to a height of 31 m for 8 hours? - Copper sheet

The copper plate has a length of 1 m, width 94 cm and weighs 9 kg. What is the plate thickness, if 1 m^{3}weighs 8715 kg? - Friction coefficient

What is the weight of a car when it moves on a horizontal road at a speed of v = 50 km/h at engine power P = 7 kW? The friction coefficient is 0.07 - Density of the concrete

Find the density of the concrete of the cuboid-shaped column has dimensions of 20 x 20 cm x 2 m if the weight of the column is 200 kg. - Traffic collision

When investigating a traffic accident, it was found that the driver stopped the vehicle immediately after the accident by constant braking on a 150 m track in 15 seconds. Do you approve that the driver exceeded the permitted speed (50 km/h) in the village - Hydrostatic force

What hydrostatic force is applied to an area of 30 cm^{2}in water at a depth of 20 m? (Water density is 1000 kg/m3) - Basic form

Expressed the ratios of values in the basic form: 0,5 t : 1,2 kg 200 l : 0,15 m^{3}12 t : 3600 kg 500 kg : 2,5 t 0,9 kg : 500 g 3,6 m : 240 cm 1200 mm : 2,4 m 300 l : 0,3 m^{3}6 min 30 s : 900 s - Tower model

Tower height is 300 meters, weight 8000 tons. How high is the model of the tower weight 1 kg? (State the result in the centimeters). The model is made from exactly the same material as the original no numbers need to be rounded. The result is a three-dig - Canister

Gasoline is stored in a cuboid canister having dimensions 44.5 cm, 30 cm, 16 cm. What is the total weight of a full canister when one cubic meter of gasoline weighs 710 kg and the weight of empty canister is 1.5 kg?