# Effective and mean voltage

A voltage divider consisting of resistors R1 = 103000 Ω and R2 = 197000 Ω is connected to the ideal sine wave voltage source, R2 is connected to a voltmeter which measures the mean voltage and has an internal resistance R3 = 200300 Ω, the measured value is 109 V. Determine the effective source voltage.

**Correct result:****Showing 0 comments:**

#### You need to know the following knowledge to solve this word math problem:

## Next similar math problems:

- Current in the conductor

Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm). - The bulb

What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA? - The bulb

The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V? - Coils of transformer

The primary coil of the transformer has 1100 turns and is connected to a voltage of 220V. How many turns does the secondary coil have when the voltage on it is 55 V? Determine the transformation ratio and decide what kind of transformation is it. - Coils of transformer

The primary coil of the transformer has 400 turns, a current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1. - Transformer

Transformer - U1 = 230 V, N1 = 300, N2 = 1,200, I1 = 4 A. Calculate the transformation ratio, voltage and current in the secondary coil. - Electric work

Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply. - Two resistors

Two resistors 20 Ω and 60 Ω are connected in series and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment! - Lowest voltage

Three resistors with resistors R1 = 10 kΩ, R2 = 20 kΩ, R3 = 30 kΩ are connected in series and an external voltage U = 30 V is connected to them. On which resistor is the lowest voltage? - Mains voltage

How much electric current flows through the appliance with a resistance of 40kΩ, which is connected to the mains voltage (230 V)? - Copper Cu wire

Copper wire with a diameter of 1 mm and a weight of 350 g is wound on a spool. Calculate its length if the copper density is p = 8.9 g/cm cubic. - Closed circuit

In a closed circuit, there is a voltage source with U1 = 12 V and with an internal resistance R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Determine the electric current and terminal voltage. - Energy consumption

The device is connected to 230V and draws 3.5A current. Power consumption is 1932kJ. How many minutes has this device been in operation? - Cooker

A current of 2A passes through the immersion cooker at a voltage of 230V. What work do the electric field forces in 2 minutes? - The copper wire

The copper wire bundle with a diameter of 2.8mm has a weight of 5kg. How many meters of wire is bundled if 1m3 of copper weighs 8930kg? - 3 phase load

Two wattmeters are connected to measuring power in a 3 phase balanced load. Determine the total power and power factor if the two wattmeters read 1000 watts each (1) both positive and (2) second reading is negative - Kilowatt-hours

If the Lewis family used 648 kilowatt-hours of electricity in 12 days, how many kilowatts hours should they use in 24 days at the same rate of usage