# Accelerated motion - mechanics

The delivery truck with a total weight of 3.6 t accelerates from 76km/h to 130km/h in the 0.286 km long way. How much was the force needed to achieve this acceleration?

**Correct result:****Showing 0 comments:**

Tips to related online calculators

Do you have a linear equation or system of equations and looking for its solution? Or do you have quadratic equation?

Do you want to convert mass units?

Do you want to convert velocity (speed) units?

Do you want to convert mass units?

Do you want to convert velocity (speed) units?

#### You need to know the following knowledge to solve this word math problem:

## Next similar math problems:

- Cement blocks

Each cement block weighs 7.9 kilograms. How much do 6 blocks weigh in total? - Dividing walnuts into crates

There are 8 and 2 over 3 pounds of walnuts in a container, which will be divided equally into containers that hold 1 and 1 over 5 pounds. This would fill n and 4 over 18 containers. What is n? - Sea on the Moon

Assume that the Moon has sea, the same composition as on the Earth (has same density of salt water). Calculate dive of boat floating in the sea on the Moon, when on Earth has dive 3.6 m. Consider that the Moon has 6.5-times smaller gravitational accelerat - Bananas and mango

5 kg of bananas and three kilograms of mango cost 146 CZK, two kilograms of bananas and 5 kilograms of mango cost 142 CZK. How much is a kilogram of bananas, and how many mangoes? - Sand

How much m ^ 3 of sand can be loaded on a car with a load capacity of 5 t? The sand density is 1600 kg/m ^ 3 . - Forces on earth directions

A force of 60 N [North] and 80 N [East] is exerted on an object wigth 10 kg. What is the acceleration of the object? - Hydrostatic force

What hydrostatic force is applied to an area of 30 cm^{2}in water at a depth of 20 m? (Water density is 1000 kg/m3) - Flywheel

Flywheel turns 450 rev/min (RPM). Determine the magnitude of the normal acceleration of the flywheel point which are at a distance of 10 cm from the rotation axis. - Shot

Shot with a mass 43 g flying at 256 m/s penetrates into the wood to a depth 25 cm. What is the average force of resistance of wood? - Chained winch

When digging a well, a chained winch is used to balance the material. An empty shackle weighs 8 kg, a full 64 kg. What force must the worker exert on the crank handle when pulling the shackle with a uniform movement from a depth of 5 m, if the shaft diame - The projectile

The projectile was fired horizontally from a height of h = 25 meters above the ground at a speed of v0 = 250 m/s. Find the range and flight time of the projectile. - Skid friction

Find the smallest coefficient of skid friction between the car tires and the road so that the car can drive at a 200 m radius at 108 km/h and does not skid. - A car

A car weighing 1.05 tonnes driving at the maximum allowed speed in the village (50 km/h) hit a solid concrete bulkhead. Calculate height it would have to fall on the concrete surface to make the impact intensity the same as in the first case! - Car

At what horizontal distance reaches the car weight m = 753 kg speed v = 74 km/h when the car engine develops a tensile force F = 3061 N. (Neglect resistance of the environment.) - Orlík hydroelectric plant

The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m^{3}/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the p - Up and down motion

We throw the body from a height h = 5 m above the Earth vertically upwards v0 = 10 m/s. How long before we have to let the second body fall freely from the same height to hit the Earth at the same time? - Angled cyclist turn

The cyclist passes through a curve with a radius of 20 m at 25 km/h. How much angle does it have to bend from the vertical inward to the turn?