Cylinder - basics

Cylinder with base radius r = 45 dm and height h=22 dm. Calculate:

Result

Area of base A1 =  6361.7 dm2
Cylinder volume V =  139958 dm3
Perimeter of base p =  282.7 dm
Area of shell A2 =  6220.4 dm2
Surface area A3 =  18943.8 dm2

Solution:

Solution in text Area of base A__1 =
Solution in text Cylinder volume V =
Solution in text Perimeter of base p =
Solution in text Area of shell A__2 =
Solution in text Surface area A__3 =







Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):

Showing 0 comments:
1st comment
Be the first to comment!
avatar




To solve this verbal math problem are needed these knowledge from mathematics:

Next similar examples:

  1. Circular pool
    arc_open The base of pool is circle with a radius r = 10 m excluding circular segment that determines chord length 10 meters. Pool depth is h = 2m. How many hectoliters of water can fit into the pool?
  2. Water
    cylinder_1 Into a full cylindrical tank high 3.6 with base radius 2.3 m we insert cuboid with dimensions 0.5 m, 1.9 m, 0.7 m. How many liters of water will come out?
  3. Cylinder
    valec Calculate the dimensions of rotating cylindrical container with volume 2 l, if height of container is equal to the diameter of the base.
  4. Pipes
    water_pipe Water pipe has a cross-section 1405 cm2. An hour has passed 756 m3 of water. How much water flows through the pipe with cross-section 300 cm2 per 15 hours if water flow same speed?
  5. Gutter
    okap How much metal is needed for production 46 pieces of gutter pipes with the diameter 12 cm and length of 4 m? The plate bends add 2% of the material.
  6. Axial section
    cylinder_cut Axial section of the cylinder has a diagonal 31 cm long and we know that the area of the side and the area of base is in ratio 3:2. Calculate the height and radius of the cylinder base.
  7. Roller
    cylinder Cylinder shell has the same content as one of its base. Cylinder height is 15 dm. What is the radius of the base of the cylinder?
  8. Plastic pipe
    pvc-trubka Calculate weight of the plastic pipe with diameter d = 70 mm and length 380 cm if the wall thickness is 4 mm and the density of plastic is 1367 kg/m3.
  9. The pot
    hrniec The pot is in 1/3 filled with water. Bottom of the pot has an area of ​​329 cm2. How many centimeters rises water level in the pot after add 1.2 liters of water?
  10. Hole
    cube_w_hole In the center of the cube with edge 14 cm we will drill cylinder shape hole. Volume of the hole must be 27% of the cube. What drill diameter should be chosen?
  11. Barrel of oil
    dieselbarrel Barrel of oil weighs 283 kg. When it mold 26% oil, weighed 216 kg. What is the mass of the empty barrel?
  12. Lathe
    soustruh From the cube of edge 37 cm was lathed maximum cylinder. What percentage of the cube is left as waste after lathed?
  13. Floating barrel
    floating_barrel Barrel (cylinder shape) floats on water, top of barrel is 8 dm above water and the width of surfaced barrel part is 23 dm. Barrel length is 24 dm. Calculate the volume of the barrel.
  14. Cu wire
    medeny-drat Copper wire has a length l = 980 m and diameter d = 8 mm. Calculate the weight if density of copper is ρ = 8500 kg/m3. Result round to one decimal place.
  15. Cylinders
    cylinders Area of the side of two cylinders is same rectangle of 50 cm × 11 cm. Which cylinder has a larger volume and by how much?
  16. Gold wire
    gold_wire From one gram of gold was pulled wire 2.1 km length. What is it diameter if density of Au is ρ=19.5 g/cm3?
  17. Tinsmith
    rury Tinsmith construct chimney pipe 145 cm long and 15 cm wide. What are the dimensions of the sheet will have to prepare for the construction of a pipe when the plate overlap at the joint add $x cm width of the plate?