Area of a shape + fundamentals of Physics - practice problems
Number of problems found: 40
- The capacitor
The parallel square plates of a 4.5µF Teflon capacitor are 3.2 mm apart. What is the area of the plate? - Hydrostatic 80798
Calculate the depth of water at which the hydrostatic pressure is equal to 100870 N/m². We only consider hydrostatic pressure. - Compressive 34391
The excavator has an area of belts 5 m2, and a pressure of 40 kPa is created. How much compressive force does the excavator exert on the road? - Cylindrical 81748
The hydrostatic pressure at the bottom of a cylindrical water container is 10 kPa. The bottom has an area of 0.25m². How much pressure does the water exert on the bottom?
- Centimeters 6366
The weight of the pupil and the chair is 52 kg. The area of the contact surfaces of the chair with the floor is 12 square centimeters. What pressure does the chair put on the floor? - Hydraulic 36041
The large piston of the hydraulic system has a capacity of 0.25 m² and a small 10 cm². How much force do we exert on the small piston to be lifted by 750 N? - Physics - pressure
Find the pressure exerted by a crawler tractor of mass 30 t standing on a flat road if the area of the contact surface of the belts with the ground is 6 m square. - Horizontal 6365
The tank's weight is 36 t, and the total contact area of the belts with the ground is 4 square meters. What pressure does the tank cause on a horizontal surface? - Diver
Please calculate using Pascal's law. The window of the diving helmet has a surface area of about 7dm². Calculate what pressure force acts on the window at a depth of 20 meters below the water surface.
- Hydraulic 35291
The hydraulic press has pistons with a capacity of 20 cm² and 800 cm². How much force acts on the larger piston if we work on the smaller piston with a force of 100 N? - Foot area
Which animal will leave a deeper footstep: an elephant weighing 5 tons with a total foot area of 0.5 square meters, or a gazelle weighing 10 kg and a foot area of 50 cm square? - Resistivity 80483
The heating coil of the cooker has a resistance of 70.5 ohms and is made of a wire with a diameter of 0.30 mm and a length of 9.8 m. Determine the resistivity of the material from which it is made. - Hydraulic 36021
The small piston of the hydraulic jack has a capacity of 40 cm² and a large 120 cm². How heavy will a body lift when a man weighing 70 kg stands on a small piston? - Grandmother 82869
Grandma wanted to fry steaks for lunch. So she went to buy a large piece of meat. Calculate the knife's contact area with the meat if the grandmother cut with a force of 220 N and exerted a pressure of 1.83 MPa.
- Resistivity 3983
What was the length of an iron wire with an area of 3cm² if its resistance was 15 ohms? Iron (Fe) resistivity is 0.0996 x 10 at -6 Ohm/meter. - Cross-section 82544
A water spray nozzle with a cross-section of 1.5 cm² sprays water at a speed of 24 m/s. What is the speed of the current in the supply pipe whose cross-section has a volume of 18 cm²? - Cross-section 71254
The steel conductors of the long-distance power line have a cross-section of 5 cm². Calculate the resistance of a steel wire with a length of 2 km if the resistivity of the steel is 13 * 10-8 Ω · m. - Revolutions 81906
How much energy was supplied by the flywheel of the device if its number of revolutions decreased from 1200 to 720 revolutions per minute if it has a moment of inertia of 71.3 kg/m²? - Single-reverse 78404
Hydraulic jack has a capacity of 10 tons. The hydraulic lifter has 6 cm² and 360 cm² pistons. Determine the diameter of the small piston (d) and the force I will create on the piston (F). Design a single-reverse and a double-reverse lever.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.