Expression of a variable from the formula + electrical engineering - practice problems
Number of problems found: 20
- Two resistors
Two resistors when they give 25 ohms in series and 4 ohms in parallel, what the values of - Resistance 80700
Determine the largest voltage on a resistor with a resistance of 150 ohms if the largest permitted electrical power current in the resistor is 2 W. - The capacitor
The parallel square plates of a 4.5µF Teflon capacitor are 3.2 mm apart. What is the area of the plate? - Transformer 3
A 200/115 V transformer has an LV (Low voltage) side resistance of 0.06 Ohm. What is the resistance referred to HV side (high voltage)? - Three resistors
You must connect three identical resistors with 12 Ohm resistances to get the resulting resistance gradually) 36 Ohm, b) 4 Ohm and 18 Ohm. Draw a diagram of each circuit. - Concerning 82883
Conductor A has an electrical potential of +140V concerning the Earth; conductor B has a potential of -60V. How much electric charge will we transfer from wire B to wire A if we do the work of 4.10-4 Joules? - Coefficient 80514
The resistance of a platinum wire at a temperature of 20°C is 20 Ω, and when heated to 500°C, it increases to 59 Ω. Determine the mean temperature coefficient of platinum - Resistance 44921
The bulb's resistance at a power input of 40 W is 10 Ω. To what voltage source is it connected? How much current is flowing through it? - Transformation 26951
The bell uses 8 V alternating voltage obtained from the 220 V mains. The secondary coil of the bell transformer has 60 turns. How many turns must the primary coil have? What is the transformation ratio? - Coils of transformer
The transformer's primary coil has 1100 turns and is connected to a voltage of 220V. How many turns does the secondary coil have when the voltage is 55 V? Find the transformation ratio and decide what kind of transformation. - Resistance 82714
A load of 23.5 ohm is connected to an ideal voltage source of 30V, and a current of 1.2A passes through the circuit. Determine the magnitude of the source's internal resistance and the short-circuit current. - Voltmeter range
We have a voltmeter which, in the original set, measures voltage to 10V. Calculate the size of the ballast resistor for this voltmeter if we want to measure the voltage up to 50V. Voltmeter's internal resistance is 2 kiloohm/Volt. - R1+R2 in parallel
The resistance ratio of the first and second resistors is 3:1, and the current flowing through the first resistor is 300 mA. What current flows through the second resistor (resistors connected in parallel)? - Resistance 80351
We connected two resistors in parallel in the circuit, with the first having three times the resistance of the second. The voltage between the terminals of each resistor is 6 V. Calculate the current through each branch when the resulting resistance of bo - The bulbs
The bulbs are connected serially to two bulbs and one resistor. Each bulb has a resistivity of 100 ohms and a resistor of 60 ohms. The voltage source in the circuit is 24 volts. Do you know what voltage to measure on individual appliances? - Temperature 80513
A copper wire coil winding has a resistance of 10 Ω at a temperature of 14°C. The passing current by the coil heats up, and its resistance increases to 12.2 Ω. To what temperature did the coil winding heat up? α = 3.92 * 10-3 1/K. - Transformation 26961
The output voltage of the transformer is 880 V. The secondary coil has 1200 turns. Determine the voltage to which the primary coil is connected and how many turns it has if a current of 1 A flows through it. The transformation ratio is k = 4. What current - Maxwell’s inductance bridge
The four arms of Maxwell's inductance bridge are; Arm AB contains an Inductive coil of inductance L1 having resistance R1. Arms BC and CD contain non-inductive resistances of 200Ω and 100Ω, respectively. Arm AD contains a standard inductor of inductance L - Closed circuit
There is a voltage source with U1 = 12 V in a closed circuit and with internal resistance, R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Find the electric current and terminal voltage. - Coils of transformer
The primary coil of the transformer has 400 turns. A current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.