Mass + electrical engineering - practice problems
Number of problems found: 7
- Heat energy
Energy is measured using the unit Joule (J). Temperature is measured using the unit degree Celsius °C). To increase the temperature of 1 liter of water by 1°C, 4200 J of heat energy is required. (a) Kelly wants to increase the temperature of 2 liters of w - Effectiveness 80711
When testing the effectiveness of an electric cooker with data of 220 V, 1200 W, 1 kg of water at a temperature of 15 degrees Celsius was boiled for 8.5 minutes. Calculate the stove efficiency corresponding to these data - Copper Cu wire
Copper wire with a diameter of 1 mm and a weight of 350 g is wound on a spool. Calculate its length if the copper density is p = 8.9 g/cm cubic. - The copper wire
The copper wire bundle with a diameter of 2.8mm weighs 5kg. How many meters of wire are bundled if 1m³ of copper weighs 8930kg? - Transformer 20073
The transformer is oil-cooled and transforms a power of 20MW with an efficiency of 92%. Determine the temperature of the oil at the outlet of the transformer if the oil was 20°C when it entered the transformer. 2.5 liters of oil will flow through the tran - Orlík hydroelectric plant
The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m3/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed pow - Aluminum wire
Aluminum wire of 3 mm diameter has a total weight of 1909 kg and a density of 2700 kg/m³. How long is the wire bundle?
We apologize, but in this category are not a lot of examples.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.