Practice problems of the unit conversion of a density - page 3 of 11
Number of problems found: 210
- Temperature 38971
A zinc body has a volume of 20 dm³. What heat is needed to warm it from a temperature of 25 to 100 degrees Celsius? What is this body's heat capacity C (unit J/K)? - Weighing 17273
A body weighing 2 kg with a 7.8 g / cm³ density is placed in water. Does the body sink? Will he swim (1 = Yes, 0 = No)? - Above water surface
If we remove the stone from the water, we apply a force of 120N. How much force will we exert if we move the stone above the water? The stone's density is 5000 kg/m³. - Refueling 83303
A liter of gasoline costs €1.2. After refueling, my car weight increased by 15 kg. The density of gasoline is p=750kg/m³. How many euros did I fill up with?
- Containers 2686
One m³ of wood weighs 650 kg, of which 12% is water. How many 10-liter containers do we need for this amount of water? - Suspended 82617
A round steel weight (ρ1=7800 kg/m3) is suspended on a thread and immersed in water (ρ2=1000 kg/m3). The volume of the weight is 1dm³. With what force is the thread stretched? - Dynamometer
What is the volume of a body that stretches a dynamometer in air, on which a force of 2.5 N suspends it, and if it is immersed in alcohol with a density of 800 kg/m³, does it tension the dynamometer with a force of 1.3 N? - Railway wagon
The railway wagon holds a 75 m³ load. The wagon can carry a maximum weight of 30 tonnes. What is the maximum density that may have material with which we could fill this whole wagon? b) what amount of peat (density 350 kg/m3) can carry 15 wagon - Deciliters 30583
When Vírka visited the Dead Sea, she took a bowl with sand, pebbles, and water from the sea as a souvenir. The water in the bowl weighed 400g. How many deciliters of water did the eddy carry away from the sea? The density of salt water in the Dead Sea is
- Calculate 33911
Calculate the volume of 50% KI solution and the volume of 20% KI solution needed to prepare 180g of 30% KI solution. The solution densities are known: ρ50% = 1.54575 g / cm3, ρ20% = 1.16597 g / cm³. - Pump power
Determine the pump power if: I pour 3 m³ of water from the tank in 120 seconds with a hose. The height of the hose mouth above the tank is 1.5 m. The water's speed from the hose outlet is 20 m/s. - What power 2
What power has a pump output to move 4853 hl of water to a height of 31 m for 8 hours? Comparing the power generated by the pump vs. the power generated by the motor, which is more efficient? Which pump or motor generates more pollution if, for every watt - Heat transfer
We placed a lead object weighing 0.4 kg and 250°C in 0.4 L water. What was the initial temperature of water t2 if the object's temperature and the water after reaching equilibrium was 35°C? We assume that the heat exchange occurred only between the lead o - Difference 69354
An airplane flies at a speed of 920 km/h at an altitude of 11 km above the surface of the Earth, where the air density is p = 0.36 kg/m³. Determine the pressure difference above and below the plane's wing if the top of the plane is 10% longer than the bot
- Prepare 6932
To prepare 40 buns, we need 3 dl milk, 3 dags of yeast, 6 g of sugar, 0.5 kg of flour, 4 spoons of oil, and 1 egg yolk = 15 g. After baking, the buns are filled with filling, for which we need 36 g of cheese, 20 dag of butter, and 200 dag of cream. How mu - Tower model
The tower's height is 300 meters, and its weight is 8000 tons. How high is the model of the tower's weight of 1 kg? (State the result in centimeters). The model is made from exactly the same material as the original no numbers need to be rounded. A result - Transformer 20073
The transformer is oil-cooled and transforms a power of 20MW with an efficiency of 92%. Determine the temperature of the oil at the outlet of the transformer if the oil was 20°C when it entered the transformer. 2.5 liters of oil will flow through the tran - Orlík hydroelectric plant
The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m3/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed pow - Cu thief
The thief stole 142 meters copper wire with a cross-section area of $s mm². Calculate how much money gets in the scrap redemption if redeemed copper for 5.3 Eur/kg. The density of copper is 8.96 t/m³.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.