Surface area of Cylinder Problems - page 3 of 8
Number of problems found: 151
- Painter
If one liter of paint covers an area of 5 m2, how much paint is needed to cover: a) rectangular swimming pool With dimensions of 4m x 3m x 2.5m (the Inside walls and the floor only) b) the Inside walls and floor of a cylindrical reservoir with - Carpet area
The carpet is wound on a cardboard roll in the shape of a cylinder with a diameter of d=12cm and a length of l=2m. The rolled-up carpet has an outer diameter of D=38cm, and the thickness of the rug is 8mm. What area can the carpet cover after unfolding? D - Barrel paint calculation
How many kg of paint do you need to buy to paint a 1.5m high cylinder-shaped rainwater cover with a 0.7m radius? We paint the barrel from the outside and inside, and 100 grams of paint is needed to paint 1 square meter. - The iron roller
The iron roller has a base circumference of 28 π cm. The worker drilled a hole through the top of the roller. After drilling, the given product had a 35% smaller volume than before. The hole's circumference in the base is equal to the height of the roller - Hectoliters - tank
A cylindrical tank with a base diameter of 1.2 m is supposed to hold 17 hectoliters of water. How many square meters of sheet metal are needed to make it? We calculate if 2% of the surfaces are for joints and waste. - Winch drum
Originally an empty winch drum with a diameter of 20 cm and a width of 30 cm on the rescue car, he started winding a rope with a thickness of 1 cm from edge to edge. The winch stopped after 80 turns. It remains to spin 3.54m of rope (without hook). How lo - Gutter pipe material
How much sheet metal do we use to produce a gutter pipe in the shape of a hollow half-cylinder 20 m long and 16 cm wide if we count 8% for bending and welding? - Cylinder-shaped part
A truncated cone-shaped part with base radii of 4 cm and 22 cm is to be recast into a cylinder-shaped part of the same height as the original part. What base radius will the new part have? - Tower room whitewash
The castle tower room has the shape of a cylinder with a diameter of 4.6m and a height of 2.9m. Calculate how much it will cost to whitewash the ceiling and walls of this room if €23 is paid for 1 square meter, while windows and doors account for 15℅ of t - Gutter metal calculation
Gutters have the shape of a half-cylinder. Their diameter is 20 cm, and the total length around the roof is 35 m. How much is sheet metal needed to make them? Add 15% to the connections. - Drinking trough
A drinking trough for cattle is in the shape of a cylinder measuring 2 metres in length and 80 cm in width. How much sheet metal is needed to make it, given that an additional 12% of material is added for joints? - Sheet metal troughs
A farmer orders sheet metal troughs from a tinsmith for loading calves on pasture. The tinsmith looks at a picture of the trough and estimates how much sheet metal he will need for one trough. Determine the sheet metal consumption, add 15% for waste and j - Pool Wall Above Water
The garden children's pool has the shape of a cylinder with a base diameter of 3.2 m and a depth of 60 cm. The water reaches 10 cm below the top edge. How many m² of the surface of the cylindrical wall of the pool is above the water? Rounds to the whole m - Pool water space
My father installed a cylinder-shaped pool in the garden with a bottom diameter of 6 m and a height of 1.5 m. how many hectoliters of water can fit in the pool? How many m² of space must be cleaned after draining the pool? - Two bodies
The rectangle with dimensions 8 cm and 4 cm is rotated 360º first around the longer side to form the first body. Then, we similarly rotate the rectangle around the shorter side b to form a second body. Find the ratio of surfaces of the first and second bo - Garden pond
The concrete garden pond has the bottom shape of a semicircle with a diameter of 1.8 m and is 72 cm deep. Daddy wants to make it surface. How many liters of water are in the pond if the water level is 33 cm? - Submarine pressure calculation
The submarine is at a depth of 50 m below the concave surface of the sea. Find the hydrostatic compressive strength of seawater on a metal cover with an area of 0.6 m². - Tin with oil
Tin with oil has the shape of a rotating cylinder whose height is equal to the diameter of its base. The canned surface is 1884 cm². Calculate how many liters of oil are in the tin. - Cylinder sheet calculation
Calculate the area of sheet metal needed to make a closed cylindrical vessel with a radius of 2.5 m and a height of 1.2 m if the joints and waste count for 6%. - Cylinder radius grinding
The carpenter worked on a rotary cylinder with a base radius of 2.5 dm and a height of 2 dm. He reduced the radius by 1 cm by uniform grinding, and the height of the cylinder was preserved. Calculate the percentage by which the volume of the cylinder has
Do you have unsolved math question and you need help? Ask a question, and we will try to solve it. We solve math question.
