Transformer 3
A 200/115 V transformer has an LV (Low voltage) side resistance of 0.06 Ohm. What is the resistance referred to HV side (high voltage)?
Correct answer:

You need to know the following knowledge to solve this word math problem:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Resistance 49711
The car's low beam bulb filament has a resistance of 5 Ω. How much electric current flows through it at the standard car battery voltage of 12 V?
- A current
A current of 0.1 A flows in the branch with a resistance of 5 ohms. In the second branch, a current of 0.2 A. Calculate: a) what is the resistance of the second branch, b) to what voltage was the circuit connected?
- Resistance 80472
A current of 0.2 A flows through a light bulb connected to a voltage of 6 V. What is the resistance of the red-hot filament?
- Resistance 5713
The kettle is connected to a voltage of 230 V. Its resistance is 130 ohms. What is the current flowing through the kettle?
- Coil as a girl
The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V?
- Resistance 66054
The handset has a resistance of 4000 ohms. Calculate what voltage is connected to them if the current passes 2.5mA.
- Electrical 61534
A current of 5 mA flows through a resistor with an electrical resistance of 600 Ω. What electrical voltage do we measure between the resistor terminals?
- Resistance 5939
If the resistance of the first resistor is 200 ohms and the resistance of the second resistor is 600 ohms. What will be the ratio of the electrical voltage across the first resistor to the electrical voltage across the second resistor (both are connected
- Cooker spiral
A current of 4.4 A flows through the spiral of the electric cooker. It is connected to a voltage of 220 V. What is the resistance of the spiral?
- Effective and mean voltage
A voltage divider consisting of resistors R1 = 103000 Ω and R2 = 197000 Ω is connected to the ideal sine wave voltage source, R2 is connected to a voltmeter which measures the mean voltage and has an internal resistance R3 = 200300 Ω, the measured value i
- Individual 46993
We measured the voltage U= 75 V between the circuit's external terminals with a voltmeter. The circuit's resistance values of the individual resistors (in series) are 50 Ohm and 100 Ohm. Find out what voltage we would measure on the 1st and 2nd resistor
- Resistance 34891
What is the voltage in the circuit if its total resistance is 920 (ohm) and the current is 250 mA?
- Resistance 31421
What resistance must the electric element have to pass through a current of 4.4A at voltage 220V?
- Conductor resistance
Calculate the resistance value of the electrical conductor if it is connected to a voltage of 12 V and an electric current of 0.3 A passes through it.
- Resistor
Resistor 1 with a resistance of 100 Ohms and resistor 2 with a resistance of 400 Ohms are connected side by side in the circuit. There is a voltage of 80V between the resistor terminals. a) Draw a circuit diagram and write the entered quantities in it b)
- The transformer
The transformer's primary coil has 1100 turns and is connected to a voltage of 220 V. How many turns does the secondary coil have when it has a voltage of 55 V? Determine the transformation ratio and decide what the transformation is.
- Coils of transformer
The primary coil of the transformer has 400 turns. A current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1.