LED circuit calculation

The LED parameters are: ULed is 3 V, Current 100 mA
Take measures so that the LED at the U 12 V supply is not destroyed. Perform the calculation and also the wiring diagram.

Your answer:

Help us improve! If you spot a mistake, please let let us know. Thank you!

You need to know the following knowledge to solve this word math problem:

Units of physical quantities

unit conversion

themes, topics

Grade of the word problem

Related math problems and questions:

Electric motors
1. What frequency does the electrical distribution network in Europe have? 2. Write what revolutions a synchronous motor with three pole shoes should have? 3. By what device would you increase or decrease the revolutions of an electric motor? 4. Write why
LED resistor current
Calculate the current I that would race through resistor R5 (720 ohms), resistor R2 (220 ohms), and an LED (U=2 V) at a DC 6 V source. The resistors are connected in series.
Bulb Current Resistance Calculation
The bulb is connected to a 4.5 V power supply. An electric current of 45 mA flows through the filament of the bulb. The calculated size of the electrical field of the filament lamp
Senior students
There are 7,000 students at Mountain High School, and 2/7 of these students are seniors. If 2/5 of the seniors favour the school forming a debate team and 3/8 of the remaining students (non-seniors) also favour forming a debate team, how many students do
Employees 4
Of 125 employees, 102 are assigned to perform ONLY ONE programming job, either system programming or application programming. Ten employees are not assigned to perform any of those programming jobs. Overall, 52 employees are given to perform ONLY system p
Two resistors 5
Two resistors are connected in parallel. The first resistor has a resistance of 2,000 ohms and a current of 4 mA flows through it. The second resistor has a resistance of 1,600 ohms. 1. Draw a circuit diagram. 2. Determine the voltage of the power source.
Current in the conductor
Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).