Mains voltage

How much electric current flows through the appliance with a resistance of 40kΩ, which is connected to the mains voltage (230 V)?

Correct result:

I =  5.75 mA

Solution:

R=40000 Ω U=230 V  I1=U/R=230/40000=2340000.0058 A I=1000 I1=1000 0.0058=234=234 mA=5.75 mA



We would be pleased if you find an error in the word problem, spelling mistakes, or inaccuracies and send it to us. Thank you!






Showing 0 comments:
avatar




You need to know the following knowledge to solve this word math problem:

Next similar math problems:

  • Closed circuit
    voltemeter In a closed circuit, there is a voltage source with U1 = 12 V and with an internal resistance R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Determine the electric current and terminal voltage.
  • Current in the conductor
    ohms-law Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).
  • Filament of bulb
    bulb _1 The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
  • Resistance
    bulb_1 Determine the resistance of the bulb with current 200 mA and is in regular lamp (230V).
  • Cooker
    kWMeter A current of 2A passes through the immersion cooker at a voltage of 230V. What work do the electric field forces in 2 minutes?
  • Resistance of the resistor
    Elektrárna_1 The resistor terminals have a voltage of 20 V and a current of 5 mA is passed through. What is the resistance of the resistor?
  • Resistance
    Rezistor_2 A resistor having an electrical resistance of 1.5 k ohms passes an electrical current of 0.1 A. Calculate what voltage is between the terminals of the resistor.
  • Copper winding
    ohms-law Calculate the current flowing through the copper winding at an operating temperature of 70°C. Celsius, if the winding diameter is 1.128 mm and the winding length is 40 m. The winding is connected to 8V.
  • Electric work
    bulb Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply.
  • Energy consumption
    elektromer The device is connected to 230V and draws 3.5A current. Power consumption is 1932kJ. How many minutes has this device been in operation?
  • Effective and mean voltage
    serial-parallel A voltage divider consisting of resistors R1 = 103000 Ω and R2 = 197000 Ω is connected to the ideal sine wave voltage source, R2 is connected to a voltmeter which measures the mean voltage and has an internal resistance R3 = 200300 Ω, the measured value i
  • The bulb
    bulbs What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA?
  • Coil as a girl
    tlmivka_TL1.JPG The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V?
  • Two resistors
    resistor_1 Two resistors 20 Ω and 60 Ω are connected in series and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment!
  • Coils of transformer
    transformator The primary coil of the transformer has 400 turns, a current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1.
  • Electronics: Resistors in parallel
    resistors_1 From relation for calculating the resistance of parallel combination of resistors: ? Calculate the R, if R1 = 2Ω a R2 = 15Ω
  • The bulb
    bulbs The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V?