# Centimeters 3131

111 square centimeters of sheet metal are used to produce one part. How many of the most parts can we make from sheet metal with dimensions of 3 m wide and 0.75 m long?

### Correct answer:

#### You need to know the following knowledge to solve this word math problem:

#### Units of physical quantities:

#### Grade of the word problem:

We encourage you to watch this tutorial video on this math problem: video1

## Related math problems and questions:

- Thickness 3015

The copper sheet metal has a thickness of 3 mm, is 0.9 meters long, and is 75 hundred meters wide. How many kilos does it weigh if one dm³ copper weighs 8.8kg? - Rectangular 69214

The area of the rectangular plot with a length of 70m is 2100m². How many meters of mesh is needed to fence it if the inserted sheet metal gate is 1.5 m wide? - Gutter pipe

How many m² of sheet metal is required to produce a 12 m long and 18 cm wide gutter if a 7% bend is required? - Calculate 6244

Calculate how many dm² of sheet metal it takes to produce a box without a lid measuring 2.1dm, 3.5dm, and 0.5dm in height. - Cans

How many m² of metal sheet is needed to produce 20,000 cans in the shape of a cylinder with a base radius and a height of 5 cm? - Create 44531

We make a box in the shape of a cube with an edge of 12 cm. How many cm² of sheet metal do we need to create a box if we do not make the lid? - Half-cylinder 25121

How much sheet metal do we use to produce a gutter pipe in the shape of a hollow half-cylinder 20 m long and 16 cm wide if we count 8% for bending and welding? - Three machines

The power of the three machines is 2: 3: 5. Two most powerful machines produce 400 parts per hour. How many components make all three machines in 3 hours? - Square metal sheet

We cut out four squares of 300 mm side from a square sheet metal plate with a side of 0,7 m. Express the fraction and the percentage of waste from the square metal sheet. - Block-shaped 37841

Calculate how much sheet metal is needed to make a closed block-shaped container with dimensions of 2 m, 7 m, and 9 m if we must add 12% to the welds. - Required 3504

The milling machine makes the part in 20 minutes. On a better machine, it can make 30 parts in 6 hours. By how much percent will the time required to produce one part on a new machine be reduced? - Cube-shaped 28101

How many square decimetres of sheet metal are needed for a cube-shaped tank, open at the top with an edge of 75 cm? - Cuboid-shaped 49763

The cuboid-shaped sheet metal tank with dimensions a=25dm, b=5.6m, and c=180cm will be painted from the outside. How many cans of paint do we need to buy, and how many CZK crowns will we pay? One costs CZK 204, and it is enough to paint 8.5m². - Diameter 30533

The open tank has the shape of a cylinder with a diameter of d = 1 m and a height of v = 2 m. How many m² of sheet metal is needed to make the tank? How many liters of water will fit in this tank? - Mats

How many m² of leatherette was used to produce five mats with dimensions of 2 m, 1 m, and 8 cm? - Cross-section 35063

How many m² of sheet metal is needed for plating chimneys 4 m high with a rectangular cross-section with dimensions of 2.5 m and 1.2 m? - Transporting 17193

A barrel for transporting fuel has a height of 90 cm and a radius of the base of 30 cm. How many square meters of sheet metal are needed to make a barrel?