Compressive 34391
The excavator has an area of belts 5 m2, and a pressure of 40 kPa is created. How much compressive force does the excavator exert on the road?
Correct answer:
You need to know the following knowledge to solve this word math problem:
Units of physical quantities:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Compressive 34401
How much compressive force does an aquarium with a bottom area of 0.24 m² exert on the table when a pressure of 3 kPa is created? - Cylindrical 81748
The hydrostatic pressure at the bottom of a cylindrical water container is 10 kPa. The bottom has an area of 0.25m². How much pressure does the water exert on the bottom? - Compressive 18853
The granite cube with an edge length of 1 dm and a weight of 2.5 kg is immersed in a container with water. How much buoyancy makes it lighter? How much compressive force does the cube exert on the bottom of the container? - Atmospheric 39931
The content of the horizontal plate is 0.80m². The atmospheric pressure around the plate is 1100 hPa. 1. How much pressure does the air exert on the plate from above? 2. What is its direction? 3. Is the magnitude of this force different if the plate is ti
- Steering 49363
The steering wheel has a diameter of 40 cm. It is acted upon by a pair of forces with a torque of 27 Newton-meters. How much force does it exert on each side of the steering wheel? - Compressive 6327
A force of 60 N acts on the smaller piston of a hydraulic press, 24 mm in diameter. What is the pressure in the liquid below the piston? How much compressive force is produced on the larger piston with a diameter of 420 mm? - Physics - pressure
Find the pressure exerted by a crawler tractor of mass 30 t standing on a flat road if the area of the contact surface of the belts with the ground is 6 m square. - Calculations 29911
Calculations according to Pascal's law. A boiler with an internal wall area of 3.4 m² will be tested at a pressure of 0.9 MPa. Calculate the total compressive force acting on the boiler walls. - Horizontal 6365
The tank's weight is 36 t, and the total contact area of the belts with the ground is 4 square meters. What pressure does the tank cause on a horizontal surface?
- Compressive 4914
At what depth does a hydrostatic compressive force of 3.2 MN acting on an area of 30 m² arise in mercury? (mercury density is 13,500 kg / m2) - Completely 82545
A granite cube with an edge length of 1 dm and a weight of 2.5 kg is completely immersed in a container of water. How much buoyancy does it lighten? How much pressure does the cube exert on the bottom of the container? - Hydraulic 36041
The large piston of the hydraulic system has a capacity of 0.25 m² and a small 10 cm². How much force do we exert on the small piston to be lifted by 750 N? - Steering 8186
What force does the driver exert when turning on the steering wheel if the steering wheel diameter is 35 cm and the torque is 3.5 N. M? - Hydraulic 7194
The hydraulic system has: S1 = 0.02 m² S2 = 2 m² F1 =? F2 = 40000 N What force must we exert to get a force of 40,000 N?
- Molecules 45441
The mean square velocity of the gas molecules is 1200 m/s. What pressure does this gas exert on the vessel wall when its density is 0.03 kg/m³? - Compressive 4894
At what depths does a hydrostatic compressive force of 3 kN act at a depth of 30 m in water? - Submerged 81714
A concrete column with a density of 3500 kg/m3, a height of 6 m, and a square base of a=25 cm lies at the bottom of the dam at a depth of 10 m. At the upper end, it is lifted by a rope by a crane. 1) with how much force does the pole stretch th
