Water flow

How much water flow in pipe with a diameter of 16 cm in 1 hour if the water velocity is 2.5 m/s?

Correct answer:

V =  180956 l

Step-by-step explanation:

D=16/10=85=1.6 dm r=D/2=1.6/2=45=0.8 dm S=π r2=3.1416 0.822.0106 dm2 v=2.5 10=25 dm/s t=3600 s s=v t=25 3600=90000 dm V=s S=90000 2.0106=180956 l



Did you find an error or inaccuracy? Feel free to write us. Thank you!



avatar







Tips to related online calculators
Do you know the volume and unit volume, and want to convert volume units?
Do you want to convert velocity (speed) units?
Do you want to convert time units like minutes to seconds?

You need to know the following knowledge to solve this word math problem:

Related math problems and questions:

  • Water flow 2
    water3 How many litres of water will flow in 7 minutes from a cylindrical pipe 1 cm in diameter, if the water flows at a speed of 30 km per hour
  • The pipe
    roura The pipe is 1.5 m long. Its outer diameter is 60 cm, inner diameter is 52 cm. Calculate the pipe's weight if the material's density from which it is made is 2 g/cm3. Round the results to whole kilograms.
  • Water tank
    valec The water tank has a cylindrical shape with a base diameter of 4.2 m and is 80 cm deep. How many minutes will take fill it 10 cm below the edge of the tank if water flowing 2 liters per second?
  • Pipes
    water_pipe The water pipe has a cross-section 1087 cm2. An hour has passed 960 m3 of water. How much water flows through the pipe with cross-section 300 cm2 per 9 hours if water flows the same speed?
  • Cylinder horizontally
    CylindricalSegment The cylinder with a diameter of 3 m and a height/length of 15 m is laid horizontally. Water is poured into it, reaching a height of 60 cm below the axis of the cylinder. How many hectoliters of water is in the cylinder?
  • Water cylinder
    cylinder Zuzana poured 785 ml of water into a measuring cylinder with a base radius of 5 cm. The water in the cylinder reached a height of 2 cm from the upper edge of the cylinder. How tall is the cylinder? (π = 3.14)
  • Water tank
    watertank The block-shaped tank is 2.5 m long, 100 cm wide and 12 dm high. In how many minutes will it be filled with water to two thirds if 40 liters of water flow into the tank per minute?
  • Pool
    bazen-2-05 The pool has the shape of a cylinder with a diameter of 4.6 m, and the presumed height is 130cm. The bucket fits 12l of water. How many buckets do you have to bring to fill this pool?
  • Conva
    konva How many liters of water fit into the shape of a cylinder with a bottom diameter 20 cm and a height 45 cm?
  • An experiment
    rain The three friends agreed to the experiment. At the same time, they all took out an empty cylindrical container on the windowsill and placed it so that it was horizontal. Everyone lives in a different village, and each used a container with a different bot
  • Hectoliters
    sudy How many hectoliters of water is in a garden barrel with 90 cm diameter and a height of 1.3 m if it is filled to 80% of its capacity?
  • Water level
    flow To cuboid-shaped poll, bottom size 2m and 3.5m; flows water at a rate of 50 liters per minute. How long will it take for water to reach level 50 cm?
  • Cylinder container
    valec2 The cylindrical container with a diameter of 1.8 m contains 2,000 liters of water. How high does the water reach?
  • Iron density
    pipe1 Calculate the weight of a 2 m long rail pipe with an internal diameter of 10 cm and a wall thickness of 3 mm. The iron density is p = 7.8 g/cm3.
  • The pool
    inlet The pool contains 220 m3 of water. The pool can be emptied either: a) 10 hours of pipe B and 8 hours of pipe A, or b) 10 hours of pipe A and 7 hours of pipe B. How many cubic meters of water will flow in 1 hour from pipe A and how many from pipe B?
  • Diameter of a cylinder
    cylinder_horiz The diameter of the cylinder is 42 cm. How many times does the cylinder turn on a 66m long track?
  • Velocity ratio
    rov_kontinuity Determine the ratio at which the fluid velocity in different parts of the pipeline (one part has a diameter of 5 cm and the other has a diameter of 3 cm), when you know that at every point of the liquid is the product of the area of tube [S] and the fluid