Hydraulic 7194
The hydraulic system has:
S1 = 0.02 m2
S2 = 2 m2
F1 =?
F2 = 40000 N
What force must we exert to get a force of 40,000 N?
S1 = 0.02 m2
S2 = 2 m2
F1 =?
F2 = 40000 N
What force must we exert to get a force of 40,000 N?
Correct answer:
You need to know the following knowledge to solve this word math problem:
Units of physical quantities:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Hydraulic 36041
The large piston of the hydraulic system has a capacity of 0.25 m² and a small 10 cm². How much force do we exert on the small piston to be lifted by 750 N? - Hydraulic 36031
The hydraulic blade has pistons with an area of 10 cm² and 500 cm². How much force acts on the larger piston if we act on the smaller piston with a force of 100 N? - Hydraulic 35291
The hydraulic press has pistons with a capacity of 20 cm² and 800 cm². How much force acts on the larger piston if we work on the smaller piston with a force of 100 N? - Above water surface
If we remove the stone from the water, we apply a force of 120N. How much force will we exert if we move the stone above the water? The stone's density is 5000 kg/m³. - Hydraulic 35301
The hydraulic jack has pistons with a capacity of 6 cm² and 360 cm². How much force do we have to apply to the smaller piston to be able to lift a body weighing 180 kg on the larger piston? - Atmospheric 39931
The content of the horizontal plate is 0.80m². The atmospheric pressure around the plate is 1100 hPa. 1. How much pressure does the air exert on the plate from above? 2. What is its direction? 3. Is the magnitude of this force different if the plate is ti - Compressive 34401
How much compressive force does an aquarium with a bottom area of 0.24 m² exert on the table when a pressure of 3 kPa is created? - Compressive 34391
The excavator has an area of belts 5 m2, and a pressure of 40 kPa is created. How much compressive force does the excavator exert on the road? - Chained winch
When digging a well, a chained winch balances the material. An empty shackle weighs 8 kg, a total of 64 kg. What force must the worker exert on the crank handle when pulling the shackle with a constant movement from a depth of 5 m if the shaft diameter is - Pascal's law
Please calculate according to Pascal's law. Krupp's machines were known for their large size. In 1861, the inventor put a blacksmith's steam hydraulic press into operation in Essen. What was the cross-sectional area of the larger piston if a compressive f - Inclined plane
1. How much work W do we have to do to pull a body weighing 200 kg along an inclined plane with a length of 4 m to a total height of 1.5 m? 2. Find the force we need to exert to do this if we neglect frictional resistance. 3. Find the force we would need - Steering 8186
What force does the driver exert when turning on the steering wheel if the steering wheel diameter is 35 cm and the torque is 3.5 N. M? - Percentage - fractions
About what percentage must we increase the number 1/6 to get the number 1/3? - Steering 49363
The steering wheel has a diameter of 40 cm. It is acted upon by a pair of forces with a torque of 27 Newton-meters. How much force does it exert on each side of the steering wheel? - Increase 81782
What ratio must we increase to 1 m to get 1 m 50 cm? - The car
The car weight 1280 kg and increased its speed from 7.3 m/s to 63 km/h on a track of 37.2 m. What force did the car engine have to exert? - Determinant 5531
The determinant of matrix J has the value 0. What will be the value of the determinant of matrix C, which we get as the square of matrix J?