# Electric charge

The electric current in a microprocessor circuit is 0.230 μA. How many coulombs pass a given point in the circuit in 1.50 ms?

## Correct answer:

Tips for related online calculators

Do you want to convert velocity (speed) units?

Do you want to convert time units like minutes to seconds?

Do you want to convert time units like minutes to seconds?

#### You need to know the following knowledge to solve this word math problem:

#### Units of physical quantities:

#### Themes, topics:

#### Grade of the word problem:

We encourage you to watch this tutorial video on this math problem: video1

## Related math problems and questions:

- Cross-section 5721

Calculate how much electric current flows through the circuit if a 3 C (C is SI unit - Coulombs) electric charge passes through the conductor cross-section in 30 seconds. - Connected 6668

There are three light bulbs connected in a row in the circuit. Which light bulb does the largest electric current pass through? - Cross-section 6663

The electric current is 500mA. How much electric charge will pass through the cross-section of the conductor in 4 s? - Electrical 40291

At a certain point, we measured a voltage of 4.5V at a current of 150 mA at the bulb's terminals connected to the electrical circuit. What is the resistance of the bulb?

- Automatically 80704

The electric circuit breaker automatically switches off the circuit of the 220 V electrical network at a current of 6 A. Determine the maximum power in the protected circuit. - Resistance 31421

What resistance must the electric element have to pass through a current of 4.4A at a voltage of 220V? - Cross-section and coulombs

Determine the current flowing through the conductor if a charge of 150 C has passed through its cross-section in one minute. - Filament of bulb

The bulb's filament has a 1-ohm resistivity and is connected to a voltage of 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds? - Open and short circuit tests

A 4 kVA 200/400 V single phase 50 Hz transformer has the following data on O. C. (open circuit) & S. C. (short circuit) test: O. C. Test: 200 V 0.8 A 70 W (Low Voltage side) S. C. Test: 20 V 10 A 80 W (High Voltage side) Find Full Load efficiency and regu

- Closed circuit

There is a voltage source with U1 = 12 V in a closed circuit and with internal resistance, R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Find the electric current and terminal voltage. - Car loop

The toy car runs at an average speed of 2 m/s. In a minute, it will pass the entire circuit five times. How long is the loop? - Individual 47281

Two resistors, R1 = 300 ohms and R2 = 600 ohms, are connected next. A voltage of 220V is connected. Determine the total resistance by which we can replace both the electric currents passing through the individual resistors and the electric current passing - Electric work

Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply. - Resistance 34891

What is the voltage in the circuit if its total resistance is 920 (Ohms) and the current is 250 mA?

- Electrical 19373

At a certain point, we measured a voltage of 3.74V at a current of 170mA at the terminals of a resistor connected to an electrical circuit. Calculate the resistance of the resistor. - Conductor 43201

An electric charge of 10 C passed through the conductor in 50 s. What electric current passed through the conductor? - A current

A current of 0.1 A flows in the branch with a resistance of 5 ohms. In the second branch, a current of 0.2 A. Calculate: a) what is the resistance of the second branch, b) to what voltage was the circuit connected?