Connected 6668
There are three light bulbs connected in a row in the circuit. Which light bulb does the largest electric current pass through?
Correct answer:
You need to know the following knowledge to solve this word math problem:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Filament of bulb
The bulb's filament has a 1-ohm resistivity and is connected to a voltage of 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds? - Resistances 80352
We connect a 9V battery, 2 light bulbs in parallel, and a switch to the circuit. When the switch is turned on, a current of 0.5 A passes through the first bulb and a current of 8 A through the unbranched part of the circuit. Draw the connection and calcul - Electrical 40291
At a certain point, we measured a voltage of 4.5V at a current of 150 mA at the bulb's terminals connected to the electrical circuit. What is the resistance of the bulb? - Electricity 6667
A light bulb with power consumption P = 70 W. It is connected to a mains voltage of 230 V. How big is the electric current that flows through it? How much electricity in kWh will it use if it is on for 9 hours 30 minutes? - Individual 47281
Two resistors, R1 = 300 ohms and R2 = 600 ohms, are connected next. A voltage of 220V is connected. Determine the total resistance by which we can replace both the electric currents passing through the individual resistors and the electric current passing - Resistance 82533
A current of 275 mA passes through the filament of a light bulb with a resistance of 800 Ω. What voltage is the bulb connected to? - Resistance 80472
A current of 0.2 A flows through a light bulb connected to a voltage of 6 V. What is the resistance of the red-hot filament? - Electrical 5720
The bulb is connected to a 4.5 V power supply. An electric current of 45 mA flows through the filament of the bulb. The calculated size of the electrical field of the filament lamp - Resistance 44921 The bulb's resistance at a power input of 40 W is 10 Ω. To what voltage source is it connected? How much current is flowing through it?
- Electric work
Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply. - Resistance 7503
The resistance of a 40W light bulb is 10 Ohms. What voltage source is connected to it? What current is flowing through it? - Probability 22033
There are 30 broken-down packages with 2,000 light bulbs. What is the probability that a randomly selected light bulb is defective? - Electric energy There are 875 identical light bulbs in the sports hall lighting for 2 hours. How long does the same amount of electricity consume 100 such bulbs?
- Resistor
Resistor 1 with a resistance of 100 Ohms and resistor 2 with a resistance of 400 Ohms are connected side by side in the circuit. There is a voltage of 80V between the resistor terminals. a) Draw a circuit diagram and write the entered quantities in it b) - Cross-section 6663
The electric current is 500mA. How much electric charge will pass through the cross-section of the conductor in 4 s? - The bulbs
The bulbs are connected serially to two bulbs and one resistor. Each bulb has a resistivity of 100 ohms and a resistor of 60 ohms. The voltage source in the circuit is 24 volts. Do you know what voltage to measure on individual appliances? - Cross-section 5721
Calculate how much electric current flows through the circuit if a 3 C (C is SI unit - Coulombs) electric charge passes through the conductor cross-section in 30 seconds.
