Water depth
If the pool is 25 meters long and 10 meters wide and the water depth is 1.2 meters everywhere, how many square meters of the inside of the pool wet the water?
Final Answer:
You need to know the following knowledge to solve this word math problem:
solid geometryplanimetricsUnits of physical quantitiesGrade of the word problem
We encourage you to watch this tutorial video on this math problem: video1
Related math problems and questions:
- Pool capacity
The swimming pool also has a 15-meter-long pool 8 meters wide with a constant depth of 2 meters. If it is always filled 10 cm below the edge, how many hectoliters of water can fit in it? - Pool water calculation
How many liters of water are in a pool whose width is 12 m, length 25 m, and depth 280 cm if it is filled 10 cm below the edge? What area of the walls wet the water (in m2)? - Pool water depth
The block-shaped pool is 40 meters long and 18 meters wide. Ten thousand eight hundred hectoliters of water were poured into it. How high is the water in it (how deep is the pool)? - Swimming pool
A swimming pool 30 meters long is filled with water to a depth of 1 meter at the shallow end, and 5 meters at the deep end, and abcd the vertical area of the pool has the shape of a trapezium with the area given by S(abcd)= 1/2 (ab + cd) x ad. What is the - Pool tile calculation
The main swimming pool has a bottom paved with square tiles with a side of 15 cm. How many tiles lie at the bottom of the pool? (pool dimensions are 50m long and 25m wide. Water depth 1.6m) - Pool water
The block-shaped pool is 8.5 m long, 4.3 m wide, and 1.5 m deep. How many hectoliters of water is in it when it is filled to three-fifths of the depth? - Pool Lining Area Calculation
The pool is 25 m long, 10 m wide and deep 8 meters. How many square meters will be needed to line the walls and bottom of the pool?
