# Electrical engineering - practice problems - page 8 of 9

Electrical engineering is an engineering discipline that generally deals with the study and application of electricity, electronics, and electromagnetism.#### Number of problems found: 166

- Resistance 6626

Two resistors of 20 Ω and 30 Ω are connected in the electrical circuit. a, Calculate the total resistance in the electrical circuit if the resistors are connected in series. b, Calculate the total resistance in the electrical circuit if the resistors are - Distribution 6283

The life of the bulbs has a normal distribution with a mean value of 2000 hours and a standard deviation of 200 hours. What is the probability that the light bulb will last for at least 2100 hours? - The bulbs

The bulbs are connected serially to two bulbs and one resistor. Each bulb has a resistivity of 100 ohms and a resistor of 60 ohms. The voltage source in the circuit is 24 volts. Do you know what voltage to measure on individual appliances? - Electric energy

There are 875 identical light bulbs in the sports hall lighting for 2 hours. How long does the same amount of electricity consume 100 such bulbs? - Capacity 5999

The tank is filled in 1 hour and 12 minutes with a pump with a capacity of 25 l/s. How long does filling the tank with a 20 l / s pump take? - R1+R2 in parallel

The resistance ratio of the first and second resistors is 3:1, and the current flowing through the first resistor is 300 mA. What current flows through the second resistor (resistors connected in parallel)? - Resistance 5939

If the resistance of the first resistor is 200 ohms and the resistance of the second resistor is 600 ohms. What will be the ratio of the electrical voltage across the first resistor to the electrical voltage across the second resistor (both are connected - Resistance 5938

If the resistance of the first resistor is 100 ohms and the voltage ratio on the first and second resistors is 2:1. What will be the resistance of the second resistor connected in series? - Resistance - ohms

If the resistance of the first resistor is 300 ohms and the resistance of the second resistor is 100 ohms. What is the resulting resistance? - Resistance 5920

If the resistance ratio of the first and second resistors is 3:1 and the current flowing through the first resistor is 300 mA. What will be the current through the second resistor? - Serial connection

If the voltage on the first resistor is 6 V and the resistance ratio of the first and second resistors is 1: 3, what will be the voltage across the second resistor if they are connected in series? - Resistors 5915

If the current flowing through the first resistor is 200 mA and the second is 0.4 A. What will be the ratio of the resistors of the first and second resistors connected in parallel? - The appliance

The appliance has a power input of 2.3 kW. It is connected to the mains voltage of 230 V. What is the current flowing through the appliance? - Filament of bulb

The bulb's filament has a 1-ohm resistivity and is connected to a voltage of 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds? - Electrical 5719

A resistor with an electrical resistance of 1.5 kiloohms passes through an electrical current of 0.1 amps. Calculate the electrical voltage between the resistor terminals - Coil as a girl

The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V? - Resistance of the resistor

The resistor terminals have a voltage of 20 V, and a current of 5 mA is passed through. What is the resistance of the resistor? - Resistance 5713

The kettle is connected to a voltage of 230 V. Its resistance is 130 ohms. What is the current flowing through the kettle? - Efficiency 4073

Determine the efficiency of a vacuum cleaner with a power input of 1.2 kW when the suction power is 360 W. - Efficiency

What is the power output of a kettle 2 kW with an efficiency of 90%?

Do you have homework that you need help solving? Ask a question, and we will try to solve it.