A current of 2A passes through the immersion cooker at a voltage of 230V. What work do the electric field forces in 2 minutes?

Correct result:

W =  55200 J


U=230 V I=2 A t=2 min s=2 60  s=120 s  P=U I=230 2=460 W W=t P=120 460=55200 J

We would be pleased if you find an error in the word problem, spelling mistakes, or inaccuracies and send it to us. Thank you!

Showing 0 comments:

Tips to related online calculators
Do you want to convert time units like minutes to seconds?

You need to know the following knowledge to solve this word math problem:

Next similar math problems:

  • Electric work
    bulb Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply.
  • Filament of bulb
    bulb _1 The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
  • Mains voltage
    bulb How much electric current flows through the appliance with a resistance of 40kΩ, which is connected to the mains voltage (230 V)?
  • The bulb
    bulbs The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V?
  • Resistance of the resistor
    Elektrárna_1 The resistor terminals have a voltage of 20 V and a current of 5 mA is passed through. What is the resistance of the resistor?
  • Coil as a girl
    tlmivka_TL1.JPG The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V?
  • Resistance
    Rezistor_2 A resistor having an electrical resistance of 1.5 k ohms passes an electrical current of 0.1 A. Calculate what voltage is between the terminals of the resistor.
  • Current in the conductor
    ohms-law Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).
  • Closed circuit
    voltemeter In a closed circuit, there is a voltage source with U1 = 12 V and with an internal resistance R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Determine the electric current and terminal voltage.
  • Energy consumption
    elektromer The device is connected to 230V and draws 3.5A current. Power consumption is 1932kJ. How many minutes has this device been in operation?
  • Resistance
    bulb_1 Determine the resistance of the bulb with current 200 mA and is in regular lamp (230V).
  • Motorcycle engine
    motor_rpm The motorcycle engine has a constant power of 1.2 kW for 0.5 hours. How much work does the engine do? Express work in kWh and Ws units.
  • Electric input power
    resistor_7 Solve problems related to electric power: a) U = 120 V, I = 0.5 A, P =? b) P = 200 W, U = 230 V, I =? c) I = 5 A, P = 2200W, U =?
  • Transformer
    transformator Transformer - U1 = 230 V, N1 = 300, N2 = 1,200, I1 = 4 A. Calculate the transformation ratio, voltage and current in the secondary coil.
  • Copper winding
    ohms-law Calculate the current flowing through the copper winding at an operating temperature of 70°C. Celsius, if the winding diameter is 1.128 mm and the winding length is 40 m. The winding is connected to 8V.
  • Coils of transformer
    transformator The primary coil of the transformer has 400 turns, a current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1.
  • Orlík hydroelectric plant
    1280px-Orlík_1 The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m3/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the p