Electric work

Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply.

Correct answer:

W =  27600 J

Step-by-step explanation:

I=0.2 A t=10 min s=10 60  s=600 s U=230 V  P=U I=230 0.2=46 W W=P t=46 600=27600 J



Did you find an error or inaccuracy? Feel free to write us. Thank you!



avatar







Tips to related online calculators
Do you want to convert time units like minutes to seconds?

You need to know the following knowledge to solve this word math problem:

Related math problems and questions:

  • Cooker
    kWMeter A current of 2A passes through the immersion cooker at a voltage of 230V. What work do the electric field forces in 2 minutes?
  • Electric input power
    resistor Solve problems related to electric power: a) U = 120 V, I = 0.5 A, P =? b) P = 200 W, U = 230 V, I =? c) I = 5 A, P = 2200W, U =?
  • Filament of bulb
    bulb The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
  • Energy consumption
    elektromer The device is connected to 230V and draws 3.5A current. Power consumption is 1932kJ. How many minutes has this device been in operation?
  • The bulb
    bulbs The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V?
  • Resistance
    bulb Determine the resistance of the bulb with the current 200 mA and is in a regular lamp (230V).
  • Mains voltage
    bulb How much electric current flows through the appliance with a resistance of 40kΩ, which is connected to the mains voltage (230 V)?
  • Circuit voltage
    resistor Calculate the closed-circuit voltage. Calculate the power on the resistors. R1 = 30 ohms, R2 = 10 ohms. I = 0.1A. U =?. The resistors are connected in series, one after the other.
  • The bulb
    bulb Calculate what voltage is at the terminals of the bulb, if the work is done 18 J to transfer particles with an electric charge of 6 C.
  • Transformer
    transformator Transformer - U1 = 230 V, N1 = 300, N2 = 1,200, I1 = 4 A. Calculate the transformation ratio, voltage and current in the secondary coil.
  • Current in the conductor
    ohms-law Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).
  • Coils of transformer
    transformator The primary coil of the transformer has 400 turns, a current of 1.5 A passes through it and is connected to a voltage of 220 V. For the secondary coil, find the voltage, current, and a number of turns if the transformation ratio k = 0.1.
  • Serial resistors
    series-of-resistances-1 In the circuit shown ( two resistiors R1 and R2 serial connected), the total resistance from A to B is 16 ohms. Find the resistance R2 and the current through the R1 = 12-Ohm resistor, if voltage between A and B is 10 V.
  • The bulb
    bulbs What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA?
  • The resistance
    resistor What is the resistance of an aluminum wire 0.2 km long and 10 mm in diameter?
  • Motorcycle engine
    motor_rpm The motorcycle engine has a constant power of 1.2 kW for 0.5 hours. How much work does the engine do? Express work in kWh and Ws units.
  • Two resistors
    resistor Two resistors 20 Ω and 60 Ω are connected in series and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment!