Wheelchair

The boy pushes the wheelchair with a force of F1 = 20N. The wheelchair exerts a force of F2 on the boy. How large is this force?

Correct result:

F2 =  -20 N

Solution:

F1=20 N F2=F1=20=20 N



We would be pleased if you find an error in the word problem, spelling mistakes, or inaccuracies and send it to us. Thank you!






Showing 0 comments:
avatar




You need to know the following knowledge to solve this word math problem:

Next similar math problems:

  • Newtonmeters
    kluc-skrutky The driver loosened the nut on the car wheel with a wrench that held 20 cm from the axis of the bolt. He acted on the key with a force of 320N. At what moment did he act on the bolt?
  • Inclined plane
    naklonena_rovina The body stays on an inclined plane and exerts a compressive force of 70N on it. Find the angle between the inclined plane and the horizontal if a gravitational force of 100N acts on the body.
  • A steel
    hammer_1 A steel hammer with a weight of 0.5 kg hits the nail at a speed of 3 m/s. How deep the nail penetrates the wood if the hammer acts on the nail with an average force of 50N.
  • Air pressure
    air_pressure The meteorological station measured the air pressure of 1060 hPa (hectopascals). In addition to measuring instruments, there is a residential house that has a flat roof with dimensions of 10 m and 28 m. What pressure force in MN (meganewtons) force the ai
  • Centroid - two bodies
    sphere_bar_2 A body is composed of a 0.8 m long bar and a sphere with a radius of 0.1m attached so that its center lies on the longitudinal axis of the bar. Both bodies are of the same uniform material. The sphere is twice as heavy as the bar. Find the center of gravi
  • Accelerated motion - mechanics
    dodavka The delivery truck with a total weight of 3.6 t accelerates from 76km/h to 130km/h in the 0.286 km long way. How much was the force needed to achieve this acceleration?
  • Inclined plane
    naklonena_rovina 1. How much work W we have to do to pull a body weighing 200 kg along an inclined plane with a length of 4 m to a total height of 1.5 m. 2. Find the force we need to exert to do this if we neglect frictional resistance. 3. Find the force we would need if
  • Concrete column
    beton The concrete column of the highway bridge has the shape of a block with dimensions of 1m x 0.8m x 25m. It should be lifted by crane to a height of 20m. What is the power of his engine if the lifting takes 2 minutes?
  • Car
    motor_cylinders_kW At what horizontal distance reaches the car weight m = 753 kg speed v = 74 km/h when the car engine develops a tensile force F = 3061 N. (Neglect resistance of the environment.)
  • Hydrostatic force
    water3_5 What hydrostatic force is applied to an area of 30 cm2 in water at a depth of 20 m? (Water density is 1000 kg/m3)
  • Self-oscillation period
    lambda The water in the vessel carried by the boy has a self-oscillation period of 0.8 s. What is the size of the boy's movement speed when the length of the boy's step is 60 cm? Give the result in m/s.
  • Overload
    aircraft-02_10 What overload in g (g-force) has passed the pilot if he accelerated from 0 to 600 km/h in 3 seconds?
  • Pascal's law
    lis Please calculate according to Pascal's law. Krupp's machines were known for their large size. In 1861, a blacksmith's steam hydraulic press was put into operation in Essen. What was the cross-sectional area of the larger piston if a compressive force of 1
  • Diver
    potok Please calculate using Pascal's law. The window of the diving helmet has a surface content of about 7dm2. Calculate what pressure force acts on the window at a depth of 20 meters below the water surface.
  • Complaints
    statistics The table is given: days complaints 0-4 2 5-9 4 10-14 8 15-19 6 20-24 4 25-29 3 30-34 3 1.1 What percentage of complaints were resolved within 2weeks? 1.2 calculate the mean number of days to resolve these complaints. 1.3 calculate the modal number of day
  • Chained winch
    vedro When digging a well, a chained winch is used to balance the material. An empty shackle weighs 8 kg, a full 64 kg. What force must the worker exert on the crank handle when pulling the shackle with a uniform movement from a depth of 5 m, if the shaft diame
  • Same force
    wood The trunk of 5m length and 95 kilograms has a center of gravity 2m from the thicker end. The tribe is carried by two men, one at the thicker end. At what distance does the trunk carry a man from the other end to make the same force on it?