Resistance of the resistor
The resistor terminals have a voltage of 20 V and a current of 5 mA is passed through. What is the resistance of the resistor?
Correct result:
Correct result:

Showing 0 comments:
You need to know the following knowledge to solve this word math problem:
Next similar math problems:
- Current in the conductor
Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).
- Coil as a girl
The electrical resistance of the copper wire coil is 2.0 ohms. What current runs through the coil when the voltage between the terminals is 3.0 V?
- Resistance
A resistor having an electrical resistance of 1.5 k ohms passes an electrical current of 0.1 A. Calculate what voltage is between the terminals of the resistor.
- Closed circuit
In a closed circuit, there is a voltage source with U1 = 12 V and with an internal resistance R1 = 0.2 Ω. The external resistance is R2 = 19.8 Ω. Determine the electric current and terminal voltage.
- Resistance
Determine the resistance of the bulb with the current 200 mA and is in a regular lamp (230V).
- Mains voltage
How much electric current flows through the appliance with a resistance of 40kΩ, which is connected to the mains voltage (230 V)?
- Lowest voltage
Three resistors with resistors R1 = 10 kΩ, R2 = 20 kΩ, R3 = 30 kΩ are connected in series and an external voltage U = 30 V is connected to them. On which resistor is the lowest voltage?
- Filament of bulb
The filament of bulb has a 1 ohm resistivity and is connected to a voltage 220 V. How much electric charge will pass through the fiber when the electric current passes for 10 seconds?
- The bulb
What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA?
- Two resistors
Two resistors 20 Ω and 60 Ω are connected in series and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment!
- Voltmeter range
We have a voltmeter which in the original set measures voltage to 10V. Calculate the size of the ballast resistor for this voltmeter, if we want to measure the voltage up to 50V. Voltmeter's internal resistance is 2 kiloohm/Volt.
- Effective and mean voltage
A voltage divider consisting of resistors R1 = 103000 Ω and R2 = 197000 Ω is connected to the ideal sine wave voltage source, R2 is connected to a voltmeter which measures the mean voltage and has an internal resistance R3 = 200300 Ω, the measured value i
- The bulb
The bulb has a reading of 6V-0.05 A, what current flows through the bulb if we connect it to a cell with a voltage of 12V?
- The bulbs
The bulbs are connected serially two bulbs and one resistor. Each bulb has a resistivity of 100 ohms and resistor of 60 ohms The voltage source in the circuit is 24 volts. Do you know what voltage to measure on individual appliances?
- Cooker
A current of 2A passes through the immersion cooker at a voltage of 230V. What work do the electric field forces in 2 minutes?
- Copper winding
Calculate the current flowing through the copper winding at an operating temperature of 70°C. Celsius, if the winding diameter is 1.128 mm and the winding length is 40 m. The winding is connected to 8V.
- Transformer
Solve the textbook problems - transformer: a) N1 = 40, N2 = 80, U2 = 80 V, U1 =? b) N1 = 400, U1 = 200 V, U2 = 50 V, N2 =?