# Resistance 80606

How much resistance must be connected in parallel with the 1-ohm resistor to make the total resistance 0.6 ohm?

## Correct answer:

Tips for related online calculators

Do you have a linear equation or system of equations and are looking for its solution? Or do you have a quadratic equation?

### You need to know the following knowledge to solve this word math problem:

#### Themes, topics:

### Grade of the word problem:

## Related math problems and questions:

- Resistance 80351

We connected two resistors in parallel in the circuit, with the first having three times the resistance of the second. The voltage between the terminals of each resistor is 6 V. Calculate the current through each branch when the resulting resistance of bo - Resistance 80577

Three identical resistors connected in series have a total resistance of 9 ohms. What will be their total resistance when connected in parallel - Resistances 25271

Three resistors with resistances of 200 Ω, 400 Ω, and 600 Ω are connected in series (in series)—a current of 1.8 A flows through the first 200Ω resistor. a) What current passes through the second and what current through the third resistor? b) What are th - R1+R2 in parallel

The resistance ratio of the first and second resistors is 3:1, and the current flowing through the first resistor is 300 mA. What current flows through the second resistor (resistors connected in parallel)?

- Resistance 5939

If the resistance of the first resistor is 200 ohms and the resistance of the second resistor is 600 ohms. What will be the ratio of the electrical voltage across the first resistor to the electrical voltage across the second resistor (both are connected - Resistors 5915

If the current flowing through the first resistor is 200 mA and the second is 0.4 A, what will be the ratio of the first and second resistors connected in parallel? - Serial connection

If the voltage on the first resistor is 6 V and the resistance ratio of the first and second resistors is 1:3, what will be the voltage across the second resistor if they are connected in series?