Cross-section 35063
How many m² of sheet metal is needed for plating chimneys 4 m high with a rectangular cross-section with dimensions of 2.5 m and 1.2 m?
Correct answer:
You need to know the following knowledge to solve this word math problem:
Units of physical quantities:
Grade of the word problem:
Related math problems and questions:
- Cross-section 5558
How many m² of sheet metal is needed to cover 4 m high chimneys with a rectangular cross-section with dimensions of 2.5 m and 1.2 m? Add 1/20 to the folds. - Rectangular 69214
The area of the rectangular plot with a length of 70m is 2100m². How many meters of mesh is needed to fence it if the inserted sheet metal gate is 1.5 m wide? - Block-shaped 37841
Calculate how much sheet metal is needed to make a closed block-shaped container with dimensions of 2 m, 7 m, and 9 m if we must add 12% to the welds. - Diameter 30533
The open tank has the shape of a cylinder with a diameter of d = 1 m and a height of v = 2 m. How many m² of sheet metal is needed to make the tank? How many liters of water will fit in this tank? - Pyramid-shaped 30191
Above the pavilion, with a square floor plan with side a = 12 m, is a pyramid-shaped roof with a height of 4.5 m. How many m² of sheet metal is needed to cover this roof? - Dimensions 30651
How many tons of cement are needed to concrete two pillars 6.5 m high with a base in the shape of four squares joined into one cross of dimensions 1.2 m? 2.5 q of cement is needed for 1 cubic meter of concrete. - Again saw
We have a sculpture beam from the tree trunk with a rectangular cross-section with dimensions 91 mm and 87 mm. What is the trunk's smallest diameter? - Cans How many m² of metal sheet is needed to produce 20,000 cans in the shape of a cylinder with a base radius and a height of 5 cm?
- Four-sided 15613
The turret has the shape of a regular four-sided pyramid with a base edge 0.8 m long. The height of the turret is 1.2 m. How many square meters are needed to cover it, counting the extra 10% sheet metal waste? - Four-sided 7833
The tower has the shape of a regular four-sided pyramid with a base edge of 0.8 m. The height of the tower is 1.2 meters. How many square meters of sheet metal is needed for coverage if we count eight percent for joints and overlap? - Cube-shaped 28101
How many square decimetres of sheet metal are needed for a cube-shaped tank, open at the top with an edge of 75 cm? - Block-shaped 8378
How much paint does Peter use to paint a block-shaped sheet metal garage (without the lower base) with dimensions of 8m, 5.5m, and a height of 2.5m, if 1kg of paint is enough for a 4m square area? - Cross-section 35233
How much soil is needed to dig a 200m long ditch, the cross-section of which is a square with an area of 4812.5 cm2 - Needed 5373
The box is shaped like a cube with an edge 52 cm long. How many m² of sheet metal is needed to make a box with a lid? Add 5% to the folds of the lid and walls. - Cylindrical 30331
Calculate the area of sheet metal needed to make a closed cylindrical vessel with a radius of 2.5 m and a height of 1.2 m. If the joints and waste count for 6%. - Fe metal sheet
5/8 of the metal sheet is consumed for one product, to the second 5/6 of remains. What part of the sheet metal is needed for both products together? - Dimensions 31681 The welded sheet metal tub is shaped a prism with dimensions of 6x2x2 m. How many m³ of water can fit in it, and what is its surface?
