Megapascals
What is the area of cross-section of the piston if the force of 300 kN produces a pressure of 5 MPa?
Your answer:
Your answer:
Tips for related online calculators
Do you want to convert area units?
You need to know the following knowledge to solve this word math problem:
solid geometryplanimetryUnits of physical quantitiesthemes, topicsGrade of the word problem
We encourage you to watch this tutorial video on this math problem: video1
Related math problems and questions:
- Press force calculation
The oil pressure in the press is 20 MPa and has area S = 15 dm². Calculate the amount of force that lifts the piston. - Pascal's law
Please calculate according to Pascal's law. Krupp's machines were known for their large size. In 1861, the inventor put a blacksmith's steam hydraulic press into operation in Essen. What was the cross-sectional area of the larger piston if a compressive f - Knife meat pressure
Grandma wanted to fry steaks for lunch. So she went to buy a large piece of meat. Calculate the knife's contact area with the meat if the grandmother cut with a force of 220 N and exerted a pressure of 1.83 MPa. - Boiler pressure force
Calculations according to Pascal's law. A boiler with an internal wall area of 3.4 m² will be tested at a pressure of 0.9 MPa. Calculate the total compressive force acting on the boiler walls. - Hydrostatic pressure
At what depths does a hydrostatic compressive force of 3 kN act at a depth of 30 m in water? - Hydraulic press
A force of 60 N acts on the smaller piston of a hydraulic press, 24 mm in diameter. What is the pressure in the liquid below the piston? How much compressive force is produced on the larger piston with a diameter of 420 mm? - Hydraulic blade force
The hydraulic blade has pistons with an area of 10 cm² and 500 cm². How much force acts on the larger piston if we act on the smaller piston with a force of 100 N?
