The tank's weight is 36 t, and the total contact area of the belts with the ground is 4 square meters. What pressure does the tank cause on a horizontal surface?
Did you find an error or inaccuracy? Feel free to write us. Thank you!
Thank you for submitting an example text correction or rephasing. We will review the example in a short time and work on the publish it.
Tips for related online calculators
You need to know the following knowledge to solve this word math problem:
We encourage you to watch this tutorial video on this math problem: video1
Related math problems and questions:
- Find the
Find the pressure exerted by a crawler tractor of mass 30 t standing on a flat road if the area of the contact surface of the belts with the ground is 6 m square.
- Centimeters 6366
The weight of the pupil and the chair is 52 kg. The area of the contact surfaces of the chair with the floor is 12 square centimeters. What pressure does the chair put on the floor?
- Centimeters 61934
How much pressure on the rails will cause an empty truck weighing 20 tons if the contact area of all wheels and rails is 16 square centimeters
- Compressive 34391
How much compressive force does the excavator exert on the road if the area of its belts is 5 m² and a pressure of 40 kPa is created?
- Locomotive 40441
What is the pressure on the tracks when a 10 ton locomotive with eight wheels stands on them, and each wheel has a contact area of 4 cm2
- Horizontal Cylindrical Segment
How much fuel is in the horizontal cylindrical segment tank with a length of 10m, the width of level 1 meter, and the level is 0.2 meters below the tank's upper side?
Please calculate using Pascal's law. The window of the diving helmet has a surface area of about 7dm². Calculate what pressure force acts on the window at a depth of 20 meters below the water surface.
- Compressive 34401
How much compressive force does an aquarium with a bottom area of 0.24 m² exert on the table when a pressure of 3 kPa is created?
- Calculations 29911
Calculations according to Pascal's law. A boiler with an internal wall area of 3.4 m² will be tested at a pressure of 0.9 MPa. Calculate the total compressive force acting on the boiler walls.
- Liters 7869
There are a total of 1309 liters of oil in the two tanks. In the second, there are 4.5 times more than in the first. How many liters of oil is in each tank?
- The tank
The tank is full up to 4/5 of the total height and contains 240 hl of water. The area of the base is 6 square meters. What is the height of the tank?
- Broken tree
The tree was 35 meters high. The tree broke at the height of 10 m above the ground. Top but does not fall off it refuted on the ground. How far from the base of the tree lay its peak?
- Tank B
Tank B has the same volume as Tank A. The volume of one section of Tank B is 4545 cubic feet. What is the volume, in cubic feet, of the other section of Tank B? Total volume of both tanks A+B is 15000 ft³. Enter your answer in the box.
- Block-shaped 19193
The pressure pump delivers two cubic meters of water to the block-shaped water tank in 1 minute. The tank has a 7 m and a width of 5 meters. How much water does it draw in 1 hour? How high does the water reach in the tank?
- Pressure 61954
How does the pressure value change when we load a loader with the same weight as the car?
From the top of the 80m high tower, the body is thrown horizontally with an initial speed of 15 m/s. At what time and at what distance from the foot of the tower does the body hit the horizontal surface of the Earth? (use g = 10 ms-2)
- Molecules 45441
The mean square velocity of the gas molecules is 1200 m / s. What pressure does this gas exert on the vessel wall when its density is 0.03 kg / m 2