A light bulb
We want to connect a 2.5 V, 0.3 A light bulb to a flat battery. How much resistance and how do we need to connect to the light bulb?
Correct answer:
You need to know the following knowledge to solve this word math problem:
Themes, topics:
Grade of the word problem:
Related math problems and questions:
- Resistances 80352
We connect a 9V battery, 2 light bulbs in parallel, and a switch to the circuit. When the switch is turned on, a current of 0.5 A passes through the first bulb and a current of 8 A through the unbranched part of the circuit. Draw the connection and calcul - Resistor 81502
How big a series resistor do we need to connect to the LED if a voltage drop of 3.2 V is to be created on it and a current of 16 mA flows through the diode? We want to connect the diode to a voltage of 5V. - Resistance 49711
The car's low beam bulb filament has a resistance of 5 Ω. How much electric current flows through it at the standard car battery voltage of 12 V? - Resistance 80472
A current of 0.2 A flows through a light bulb connected to a voltage of 6 V. What is the resistance of the red-hot filament?
- The bulb
What is the resistance of a filament lamp when it is connected to a 9V battery and has a current of 120 mA? - The bulb The bulb has a reading of 6V-0.05 A. What current flows through the bulb if we connect it to a cell with a voltage of 12V?
- Resistance 82533
A current of 275 mA passes through the filament of a light bulb with a resistance of 800 Ω. What voltage is the bulb connected to? - Consumption 80702
A current of 500 mA passed through the filament of a light bulb with a resistance of 400 ohms. What is the consumption of a light bulb in 5 hours? - Resistance 7503
The resistance of a 40W light bulb is 10 Ohms. What voltage source is connected to it? What current is flowing through it?
- Inclined plane
1. How much work W do we have to do to pull a body weighing 200 kg along an inclined plane with a length of 4 m to a total height of 1.5 m? 2. Find the force we need to exert to do this if we neglect frictional resistance. 3. Find the force we would need - Ohms
Two resistors of 6 ohms and 8 ohms are connected in parallel to a flat battery U=4.5 V. Calculate: a) the total current, b) the current in the branches. - You want
You want to buy additional land in the shape of a rectangle with a width of 2,500 cm and a length of 0.065 km. How much peso do you need to pay if the price is Php 150,000/hectare? - Carpenter
You want to cut the longboard into smaller pieces. Carpenter said that one board cut into two pieces would cost you 40 cents. But you need to cut the board into 5 parts. How much do you pay? - Probability 22033
There are 30 broken-down packages with 2,000 light bulbs. What is the probability that a randomly selected light bulb is defective?
- Electrical 40291 At a certain point, we measured a voltage of 4.5V at a current of 150 mA at the bulb's terminals connected to the electrical circuit. What is the resistance of the bulb?
- Bulb
A 60 W bulb consumes 0.12 kWh of electricity. How long did she stand light without a break? - Resistance 80473 Determine the source voltage to which we must connect a 1k ohm resistance wire if a current of 40 mA is to flow through it.
