Unit conversion + fundamentals of Physics - practice problems - last page
Number of problems found: 279
- Instantaneous 76754
For a dipole, calculate the complex apparent power S and the instantaneous value of the current i(t), given: R=10 Ω, C=100uF, f=50 Hz, u(t)= square root of 2, sin( ωt - 30 °). Thanks for any help or advice. - Clock Tower
What angle is between hands-on Clock Tower when it shows 17 hours and 35 minutes? - RPM
An electric motor makes 3,000 revolutions per minute. How many degrees does it rotate in one second? - Widescreen monitor
Computer businesses were hit by a wave of widescreen monitors and televisions. Calculate the area of the LCD monitor with a diagonal size 20 inches at a ratio of 4:3 and then a 16:9 aspect ratio. Is buying widescreen monitors with the same diagonal more
- Copper winding
Calculate the current flowing through the copper winding at an operating temperature of 70°C Celsius if the winding diameter is 1.128 mm and the coiled length is 40 m. The winding is connected to 8V. - Iron density
Calculate the weight of a 2 m long rail pipe with an internal diameter of 10 cm and a wall thickness of 3 mm. The iron density is p = 7.8 g/cm³. - Perpendicular 81758
Distribute the force of magnitude F = 100 N into two perpendicular components with magnitudes F1 and F2 so that the angle between forces F1 and F is 43°52'. - Compressive 6327
A force of 60 N acts on the smaller piston of a hydraulic press, 24 mm in diameter. What is the pressure in the liquid below the piston? How much compressive force is produced on the larger piston with a diameter of 420 mm? - Components 67664
The force R = 12 N is divided into two components, F1 and F2. Their directions make angles α = 30 °, β = 45 ° with the direction R. What are the components F1 and F2?
- Inclined plane
The body stays on an inclined plane and exerts a compressive force of 70N on it. Find the angle between the inclined plane and the horizontal if a gravitational force of 100N acts on the body. - The bridge
A vehicle weighing 5,800 kg passes 41 km/h on an arched bridge with a radius of curvature of 62 m. What force pushes the car onto the bridge as it passes through the center? What maximum speed can it cross over the center of the bridge, so it does not fly - The resistance
What is the resistance of an aluminum wire, 0.2 km long and 10 mm in diameter? - Equator 6020
The Equator. ..40075 km train. ..300m. How many trains would fit on the Equator? - Temperature 7477
The pool with a length of l = 50 m and a width of s = 15 m has a depth of h1 = 1.2 m at the shallowest part of the wall. The depth then gradually increases to a depth of h2 = 1.5 m in the middle of the pool. = 4.5 m walls in the deepest part of the pool.
- Angled cyclist turn
The cyclist passes through a curve with a radius of 20 m at 25 km/h. How much angle does it have to bend from the vertical inward to the turn? - Designated 71874
The patrol had started at a designated marching angle (an azimuth) of 13°. After 9 km, the azimuth's angle changed to 62°. The patrol went 10 km in this direction. Find the distance from where the patrol started. - Gold wire
From one gram of gold was pulled wire 1.4 km length. What is its diameter if the density of Au is ρ=19.5 g/cm³? - Brass sphere
Find the weight of a brass ball with an outer radius of 12 cm and a wall thickness of 20 mm if the brass's density is 8.5 g/cm³. - Horizontal 83148
The bend has a radius of r = 100 m and is inclined at an angle of 20° to the horizontal plane (= tilt angle). What is the safe (the "best") speed to go through this curve? Sketch the picture regarding NIVS, mark the forces, and calculate.
Do you have homework that you need help solving? Ask a question, and we will try to solve it.