Deep pool - bottom
The pool is 25m long and 12m wide. In one half of the pool, the depth is the same, 1.8m, in the other half, the bottom gradually increases to a depth of 1.2m. What is the area of the entire bottom?
Final Answer:
Tips for related online calculators
See also our right triangle calculator.
You need to know the following knowledge to solve this word math problem:
arithmeticsolid geometryplanimetricsUnits of physical quantitiesGrade of the word problem
Related math problems and questions:
- Road excavation volume
When building a new road, excavating a 280m long road in the ground was necessary. The bottom width, where the road runs, was 20m wide. At the top, the entire excavation was 30m wide. The depth of the excavation is 6 m. How much m³ of soil had to be remov - Pool tile calculation
The main swimming pool has a bottom paved with square tiles with a side of 15 cm. How many tiles lie at the bottom of the pool? (pool dimensions are 50m long and 25m wide. Water depth 1.6m) - Pool Lining Area Calculation
The pool is 25 m long, 10 m wide and deep 8 meters. How many square meters will be needed to line the walls and bottom of the pool? - Water depth If the pool is 25 meters long and 10 meters wide and the water depth is 1.2 meters everywhere, how many square meters of the inside of the pool wet the water?
- Temperature and volume
The pool with a length of l = 50 m and a width of s = 15 m has a depth of h1 = 1.2 m at the shallowest part of the wall. The depth then gradually increases to a depth of h2 = 1.5 m in the middle of the pool. = 4.5 m walls in the deepest part of the pool. - Pool depth volume
Calculate the depth of a pool that is 10 m long and 5 m wide if its volume is 65 m³ - Pool water
The block-shaped pool is 8.5 m long, 4.3 m wide, and 1.5 m deep. How many hectoliters of water is in it when it is filled to three-fifths of the depth?
