Ohm's law - practice problems - page 2 of 6
Direction: Solve each problem carefully and show your solution in each item.Number of problems found: 107
- Resistance 80698
The electric iron plate has written 220 V, 1200 W. What is the resistance of the heating wire? - Resistance 80606
How much resistance must be connected in parallel with the 1-ohm resistor to make the total resistance 0.6 ohm? - A charge
A charge of 9 C passes through series-connected resistors with resistances of 40 ohms and 60 ohms in 1 minute. a) What voltage are they connected to? b) Calculate the voltage across each resistor. - Resistances 80604 Resistors with resistances of 6 ohms and 10 ohms are connected in series to a voltage of 24 V. a) How much current passes through them? b) What are the voltages on the individual resistors?
- A light bulb
We want to connect a 2.5 V, 0.3 A light bulb to a flat battery. How much resistance and how do we need to connect to the light bulb? - A current A current of 0.1 A flows in the branch with a resistance of 5 ohms. In the second branch, a current of 0.2 A. Calculate: a) what is the resistance of the second branch, b) to what voltage was the circuit connected?
- Resistance 80577
Three identical resistors connected in series have a total resistance of 9 ohms. What will be their total resistance when connected in parallel - Ohms Two resistors of 6 ohms and 8 ohms are connected in parallel to a flat battery U=4.5 V. Calculate: a) the total current, b) the current in the branches.
- Two conductors Two conductors have resistance Rs=5 ohms when connected in series and Rp=1.2 ohms when connected in parallel. Calculate the value of the resistors.
- Nikelin and brass Calculate the length of brass wire (ró=0.08 microohm m) and nickel (ró=0.4 microohm m) with a diameter of 0.5 mm, which has a resistance of 1 ohm
- Resistivity 80483 The heating coil of the cooker has a resistance of 70.5 ohms and is made of a wire with a diameter of 0.30 mm and a length of 9.8 m. Determine the resistivity of the material from which it is made.
- Resistance 80473 Determine the source voltage to which we must connect a 1k ohm resistance wire if a current of 40 mA is to flow through it.
- Resistance 80472
A current of 0.2 A flows through a light bulb connected to a voltage of 6 V. What is the resistance of the red-hot filament? - Calculate 80467 Calculate the current I that would race through resistor R5 (720 ohms), resistor R2 (220 ohms), and an LED (U=2V) at a DC 6V source. The resistors are connected in series.
- Resistances 80352
We connect a 9V battery, 2 light bulbs in parallel, and a switch to the circuit. When the switch is turned on, a current of 0.5 A passes through the first bulb and a current of 8 A through the unbranched part of the circuit. Draw the connection and calcul - Resistance 80351
We connected two resistors in parallel in the circuit, with the first having three times the resistance of the second. The voltage between the terminals of each resistor is 6 V. Calculate the current through each branch when the resulting resistance of bo - Cross-section 71254
The steel conductors of the long-distance power line have a cross-section of 5 cm². Calculate the resistance of a steel wire with a length of 2 km if the resistivity of the steel is 13 * 10-8 Ω · m. - A fan
A fan with a resistance of 20 Ω is connected to a power supply. The current flowing through the circuit is 2.5 A. What is the voltage of the power supply? - Resistance 66074
Determine the current flowing through the car's starter, whose resistance is 60 milliohms at 12V.
Two resistors with resistances of 40 ohms and 60 ohms are connected in series and connected to a voltage of 150V. A) the total resistance B) current in the circuit C) voltage on both resistorsDo you have homework that you need help solving? Ask a question, and we will try to solve it. Solving math problems.
