Temperature + unit conversion - practice problems
Number of problems found: 30
- Fahrenheit 2
Fahrenheit temperature is found by dividing the degree Celsius by 5/9 and then adding 32 to the quotient. Find the Fahrenheit temperature if the degree of Celsius is 40. - Electrical 82513
How long will it take for a current of 8A in a resistance of 30 ohms to develop thermal energy of 3 MJ if the efficiency of converting electrical energy into heat is 90%? - Surroundings 74114
In a cylinder with a piston, there is nitrogen N2 with a volume of 5 liters, a temperature of 25 degrees Celsius, and a pressure of 200 kPa. We very slowly compress the gas in the cylinder to half its volume while its temperature does not change. Determin - Which 9
Which of the temperatures is the coldest? A.100 degrees Celsius, B.373 degree Kelvin, C. 32 degrees Fahrenheit.
- Temperature 63004
Brass weighing 2.5 kg absorbs the heat of 180 kJ. How does the temperature of the brass change? The specific heat capacity of brass is 0.36 kJ / C - Temperature 61484
The air bubble at the bottom of the lake at a depth of h = 21 m has a radius r1 = 1 cm at a temperature of t1 = 4 °C. The bubble rises slowly to the surface, and its volume increases. Calculate its radius when it reaches the lake's surface, with a tempera - Please 3
Please help; I'm lost! I'm calculating the difference between two Fahrenheit degrees 55°F - 37°F = 18 °F Now, if I converted the degrees Fahrenheit to Celsius before subtracting, then we get 12.78°C - 2.78 =10°C. How is that possible when 18°F does not eq - Temperatures
Temperatures in degrees Fahrenheit and Celsius are related by the rule F = 1.8C + 32. What is the temperature in degrees Celsius if it is 50°F? - Lead melt
Find the heat needed to melt an object made of lead weighing 250g and an initial temperature of 35°C. Lead melts at 327°C at normal pressure. Mass heat capacity of lead c = 129 J/kg • K and mass latent heat of lead lt (t is the subscript) = 22.6 kJ/kg.
- Thermometer
Immerse a thermometer with a heat capacity of 2.0 J. K-1 in water weighing 67.0 grams. Before water immersion, the thermometer showed a temperature of 17.8 degrees Celsius. After reaching equilibrium, the temperature is 32.4 degrees. What was the water te - Latent heat
How much heat is needed to take from 100 g of water at 20°C to cool to the ice at -18°C? Mass heat capacity c (ice) = 21kJ/kg/°C; c (water) = 4.19 KJ/kg/°C and the mass group heat of solidification of water is l = 334kJ/kg - Heat transfer
We placed a lead object weighing 0.4 kg and 250°C in 0.4 L water. What was the initial temperature of water t2 if the object's temperature and the water after reaching equilibrium was 35°C? We assume that the heat exchange occurred only between the lead o - Radiators
Calculate the radiator output if it has a thermal gradient (difference between inlet water and return temperatures) a) 5°C b) 10°C c) 15°C d) 20°C A heating water volume flow is 45 kg/h. How fast the water flows from the supply pipe to the radiator e) DN1 - Temperature 38971
A zinc body has a volume of 20 dm³. What heat is needed to warm it from a temperature of 25 to 100 degrees Celsius? What is this body's heat capacity C (unit J/K)?
- Weather
Weather. At 5:00 am, the temperature was 28°C, and at noontime, it rose by 9°C. By 4:00 PM, it dropped 3°C; by nighttime, it was 4°C less. What is the room temperature this time? - Compressed gas
The pressure vessel contains a compressed gas at a temperature t1 = 27°C and a pressure p1 = 4 MPa. How much does its pressure change when we release half the amount of gas, and its temperature drops to t2 = 15°C? - Copper winding
Calculate the current flowing through the copper winding at an operating temperature of 70°C Celsius if the winding diameter is 1.128 mm and the coiled length is 40 m. The winding is connected to 8V. - Relationship 30501
When converting degrees Celsius (C) to degrees Fahrenheit (F), the relationship is used: F = C . 9/5 + 32. How many degrees Celsius are they in New York City if the thermometer reads 23 degrees Fahrenheit? - Water mixing
We have 520 ml of hot water and 640 ml of water at 48°C. What is the temperature of approximately hot water when the resulting mixture has a temperature of 65°C?
Do you have homework that you need help solving? Ask a question, and we will try to solve it.
Temperature - practice problems. Unit conversion practice problems.