Fundamentals of Physics + electrical engineering - practice problems - page 3 of 5
Number of problems found: 91
- Consumption 44071
Calculate the electric motor's power if it works for 10 minutes, and the electricity meter measured the consumption of 500 Wh. - Divisions 43621
With a measuring range of 30mA, the hand points to 20 divisions out of 100 divisions of the scale. What current is measured? - Conductor 43191
An electric current of 100 mA flowed through the conductor for 160 s. What electric charge passed through it? - Circuit voltage
Calculate the closed-circuit voltage. Calculate the power on the resistors. R1 = 30 ohms, R2 = 10 ohms. I = 0.1A. U =?. The resistors are connected in series, one after the other.
- Electrical 40291
At a certain point, we measured a voltage of 4.5V at a current of 150 mA at the bulb's terminals connected to the electrical circuit. What is the resistance of the bulb? - The resistance
What is the resistance of an aluminum wire, 0.2 km long and 10 mm in diameter? - Separated 38223
What is the intensity of the electric field at a point that lies in the middle between two point charges Q1 = 5.10-5 C and Q2 = 7.10-5 C, which is separated by r = 20 cm? The charges are placed in a vacuum. - Copper winding
Calculate the current flowing through the copper winding at an operating temperature of 70°C Celsius if the winding diameter is 1.128 mm and the coiled length is 40 m. The winding is connected to 8V. - Current in the conductor
Calculate the current in the conductor (in mA) if it is connected to a 4.5 V voltage source and its resistance is 20 (ohm).
- Temperature 34641
The aluminum line has a resistance of 7.6Ω at -10˚C. What will be its resistance at a temperature of + 50˚C? - Resistance 31421
What resistance must the electric element have to pass through a current of 4.4A at a voltage of 220V? - Individual 31411
On sources with voltage U = 12V, resistors R1 = 1 Ohm, R2 = 2 Ohm and R3 = 9 Ohm are connected in series. Determine the current I flowing from the source and the voltage drops U1, U2, and U3 on the individual resistors. - The bulb
The bulb has a reading of 6V-0.05 A. What current flows through the bulb if we connect it to a cell with a voltage of 12V? - Connected 31261
A stove with a current of 4.0A is connected to the 220V voltage. The current has been reduced to 2.4A due to a fault in the network. How much has the voltage in the socket dropped?
- Transformation 26961
The output voltage of the transformer is 880 V. The secondary coil has 1200 turns. Determine the voltage to which the primary coil is connected and how many turns it has if a current of 1 A flows through it. The transformation ratio is k = 4. What current - Respective 25361
Three resistors are connected according to the scheme (R1 in parallel with R2 and series with R3: R1||R2 + R3) so that R1=0.6 Ω, R2=2 Ω, R3=3 Ω, current I1 = 10 A. Calculate all the currents passing through the respective resistors R1, R2, R3 and all the - Electric work
Calculate the work done by the electric forces passing the current of 0.2 A through the bulb in 10 minutes if the bulb is connected to a 230 V power supply. - Two resistors
Two resistors, 20 Ω, and 60 Ω, are connected in series, and an external voltage of 400 V is connected to them. What are the electrical voltages on the respective resistors? Please comment! - Resistances 25281
Three resistors with resistances of 200 Ω, 400 Ω, and 600 Ω are connected next to each other (parallel). A current of 1.8 A flows through the first 200Ω resistor. a) What current passes through the second and what current through the third resistor? b) Wh
Do you have homework that you need help solving? Ask a question, and we will try to solve it.