Hydrostatic force

What hydrostatic force is applied to an area of 30 cm2 in water at a depth of 20 m? (Water density is 1000 kg/m3)

Correct result:

F =  588.6 N

Solution:

S=30 cm2 m2=30/10000  m2=0.003 m2 h=20 m V=S h=0.003 20=350=0.06 m3 ρ=1000 kg/m3  m=ρ V=1000 0.06=60 kg g=9.81 m/s2 F=m g=60 9.81=29435=29435 N=588.6 N



We would be very happy if you find an error in the example, spelling mistakes, or inaccuracies, and please send it to us. We thank you!






Showing 0 comments:
avatar




Tips to related online calculators
Do you want to convert area units?
Tip: Our Density units converter will help you with the conversion of density units.
Do you want to convert mass units?

You need to know the following knowledge to solve this word math problem:

Next similar math problems:

  • Diver
    potok Please calculate using Pascal's law. The window of the diving helmet has a surface content of about 7dm2. Calculate what pressure force acts on the window at a depth of 20 meters below the water surface.
  • Chained winch
    vedro When digging a well, a chained winch is used to balance the material. An empty shackle weighs 8 kg, a full 64 kg. What force must the worker exert on the crank handle when pulling the shackle with a uniform movement from a depth of 5 m, if the shaft diame
  • Shot
    wood_projectile Shot with a mass 43 g flying at 256 m/s penetrates into the wood to a depth 25 cm. What is the average force of resistance of wood?
  • Forces on earth directions
    compass2_1 A force of 60 N [North] and 80 N [East] is exerted on an object wigth 10 kg. What is the acceleration of the object?
  • Car
    motor_cylinders_kW At what horizontal distance reaches the car weight m = 753 kg speed v = 74 km/h when the car engine develops a tensile force F = 3061 N. (Neglect resistance of the environment.)
  • Angled cyclist turn
    cyclistTurn The cyclist passes through a curve with a radius of 20 m at 25 km/h. How much angle does it have to bend from the vertical inward to the turn?
  • Accelerated motion - mechanics
    dodavka The delivery truck with a total weight of 3.6 t accelerates from 76km/h to 130km/h in the 0.286 km long way. How much was the force needed to achieve this acceleration?
  • Orlík hydroelectric plant
    1280px-Orlík_1 The Orlík hydroelectric power plant, built in 1954-1961, consists of four Kaplan turbines. For each of them, the water with a flow rate of Q = 150 m3/s is supplied with a flow rate of h = 70.5 m at full power. a) What is the total installed power of the p
  • Concrete column
    beton The concrete column of the highway bridge has the shape of a block with dimensions of 1m x 0.8m x 25m. It should be lifted by crane to a height of 20m. What is the power of his engine if the lifting takes 2 minutes?
  • Ice floe
    ice_cubes What is the volume of an ice floe weighing 326 kg? The density of ice is only 920 kg/m3.
  • The body
    cuboid_3colors The body has dimensions of 2m 2dm and 10 cm. It weighs 28 kg. What is its density?
  • Brick wall
    bricks What is the weight of a solid brick wall that is 30 cm wide, 4 m long and 2 m high? The density of the brick is 1500 kg per cubic meter.
  • Sea on the Moon
    ship_on_moon Assume that the Moon has sea, the same composition as on the Earth (has same density of salt water). Calculate dive of boat floating in the sea on the Moon, when on Earth has dive 3.6 m. Consider that the Moon has 6.5-times smaller gravitational accelerat
  • Skid friction
    trenie Find the smallest coefficient of skid friction between the car tires and the road so that the car can drive at a 200 m radius at 108 km/h and does not skid.
  • A car
    car_31 A car weighing 1.05 tonnes driving at the maximum allowed speed in the village (50 km/h) hit a solid concrete bulkhead. Calculate height it would have to fall on the concrete surface to make the impact intensity the same as in the first case!
  • Flywheel
    zotrvacnik Flywheel turns 450 rev/min (RPM). Determine the magnitude of the normal acceleration of the flywheel point which are at a distance of 10 cm from the rotation axis.
  • Coke and coal
    coal 20.1 tons of coke is produced from 30 tons of black coal. How much coke is made from 1 kilogram of coal?