Circular cone of height 15 cm and volume 10598 cm3 is at third of the height (measured from the bottom) cut plane parallel to base. Calculate the radius and circumference of the circular cut.
Leave us a comment of example and its solution (i.e. if it is still somewhat unclear...):
Showing 0 comments:
Be the first to comment!
To solve this example are needed these knowledge from mathematics:
Next similar examples:
- Truncated cone
Calculate the height of the rotating truncated cone with volume V = 1111 cm3 and a base radii r1 = 6.2 cm and r2 = 9.8 cm.
Intersect between plane and a sphere is a circle with a radius of 60 mm. Cone whose base is this circle and whose apex is at the center of the sphere has a height of 34 mm. Calculate the surface area and volume of a sphere.
- Horizontal Cylindrical Segment
How much fuel is in the tank of horizontal cylindrical segment with a length 10m, width of level 1 meter and level is 0.2 meters below the upper side of the tank?
- Circular pool
The base of pool is circle with a radius r = 10 m excluding circular segment that determines chord length 10 meters. Pool depth is h = 2m. How many hectoliters of water can fit into the pool?
- Cylinder surface, volume
The area of the cylinder surface and the cylinder jacket are in the ratio 3: 5. The height of the cylinder is 5 cm shorter than the radius of the base. Calculate surface area and volume of cylinder.
Calculate the dimensions of rotating cylindrical container with volume 2 l, if height of container is equal to the diameter of the base.
- Tank and water
Cylindrical tank were poured with 3.5 liters of water. If tank base diameter is 3 dm, how height is water level in?
- The pot
Diameter of the pot 38 cm. The height is 30 cm. How many liters of water can fit in the pot?
- Gold wire
From one gram of gold was pulled wire 2.1 km length. What is it diameter if density of Au is ρ=19.5 g/cm3?
How high can vintner fill keg with crushed red grapes if these grapes occupy a volume of 20 percent? Keg is cylindrical with a diameter of the base 1 m and a volume 9.42 hl. Start from the premise that says that fermentation will fill the keg (the number.
- Plastic pipe
Calculate weight of the plastic pipe with diameter d = 70 mm and length 380 cm if the wall thickness is 4 mm and the density of plastic is 1367 kg/m3.
- Cu wire
Copper wire has a length l = 980 m and diameter d = 8 mm. Calculate the weight if density of copper is ρ = 8500 kg/m3. Result round to one decimal place.
How many liters of water per second can go via trough, which has a cross section of semicircle with radius 2.5 m and speed of water is 147 cm per second?
- A pipe
A radius of a cylindrical pipe is 2 ft. If the pipe is 17 ft long, what is its volume?
Area of the side of two cylinders is same rectangle of 50 cm × 11 cm. Which cylinder has a larger volume and by how much?
What is the weight of concrete cover (lid) to round shape well with a diameter 1.8 m, if the thickness of the cover is 11 cm? 1 m3 of concrete weighs 2190 kg.
- Velocity ratio
Determine the ratio at which the fluid velocity in different parts of the pipeline (one part has a diameter of 5 cm and the other has a diameter of 3 cm), when you know that at every point of the liquid is the product of the area of tube [S] and the fluid.